OPERATING THE UNIT

Listening to music

VOL + button

VOL – button

POWER button

Check the following before operating the unit.

–The Bluetooth device is turned on.

–Pairing of this unit and the Bluetooth device is complete.

–The Bluetooth device supports the transmitting music function (profile: A2DP*).

1Press and hold the POWER button for about 3 seconds while the unit is turned off.

The indicator (blue) and indicator (red) flash together twice and the unit is turned on.

Notes

•Do not press and hold the POWER button for more than 7 seconds, otherwise pairing mode is entered.

•After the unit is turned on, the unit attempts to connect to the last connected Bluetooth device automatically with HFP or HSP.

When not calling with this unit, do not make the last connected Bluetooth device ready for HFP or HSP connection. To make or receive a call while playing back music, see page 20.

2Make the Bluetooth connection (A2DP) from a Bluetooth device to this unit.

Refer to the operating instructions supplied with the Bluetooth device on how to operate it.

3Start playback on the Bluetooth device.

Tip

Bluetooth connection of A2DP (Advanced Audio Distribution Profile) can also be operated with the jog switch from this unit to the Bluetooth device except when making a call on this unit.

Notes

•When you play music by connecting the unit to a Bluetooth device using HSP (Headset Profile), sound quality will not be high. For better sound, change the Bluetooth connection to A2DP by operating the Bluetooth device.

•If this unit is turned off while an A2DP Bluetooth connection is established, operate the unit again from step 1 to make the A2DP Bluetooth connection again.

* For detail on profiles, see page 4.

Continued 15

GB