Sony DR-BT22iK again, Cannot make the, near as possible, Bluetooth connection, been “paired” before, Bluetooth connection, cannot be established, with a device that has

Symptom Cause / Remedy

Sound break, noise or playback speed change.

If a device that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device(s), or a microwave oven is nearby, move away from such sources.

Remove any obstacle between the transmitter and the headset or move away from the obstacle.

Locate the transmitter and the headset as near as possible.Re-position or re-orient the transmitter and the headset.

The headset does not operate properly.

Reset the headset. Pairing information is not deleted by this operation.Insert a small pin, etc., into the hole, and push until you feel a click.

Pairing cannot be established.

Locate the transmitter and the headset as near as possible.

Check if you input correct passcode of the transmitter (page 21).Check if you input correct passcode of the headset (page 25).

Bluetooth connection	 Locate the transmitter and other Bluetooth device(s) as
cannot be established	near as possible.
with a device that has	 Pairing information may be deleted. Pair the device
been “paired” before.	again.
Cannot make the	 Check that this product is turned on.
Bluetooth connection.	 The Bluetooth connection is terminated. Make the
	Bluetooth connection again.

Cannot make the Bluetooth connection from your mobile phone to the headset.

Press the multi function button of the headset. (The Bluetooth connection is unavailable during music playback on the headset.)

Perform the Bluetooth connection with the Bluetooth compatible mobile phone. (For details on how to operate the Bluetooth compatible mobile phone, see the operating instructions supplied with it.)

40