Advanced
9 Select “Start” using the 4(UP)/$(DOWN) buttons and then press EXECUTE.
“WB” is displayed in the viewfinder and white balance adjustment begins.
After the flash lights about 10 times, the WB indicator goes off. The white balance adjustment is complete.
The white balance value is valid until it is adjusted again.
Note
When the WB indicator flashes, the white balance is not successfully being adjusted. Exit this mode by pressing any operation button besides the WB button and readjust the white balance again.
Continuous Shooting
In this mode you can continuously shoot pictures until you reach the maximum number by keeping the release button pressed.
a Taking Operations
|
| WB |
3~5 | EA |
|
ISO E | ||
|
| U |
|
| S |
|
| R |
3
•OFF •CAM
•PLAY
1
41 While pressing the mode lock (green), turn the
power/mode dial to CAM.
|
| IV | E | |
D | R |
| ||
QUAL | ||||
| ||||
SIZE |
|
2 Turn the LCD monitor on by pressing the LCD button.
EZIS USER | Note |
BW |
Settings can also be confirmed on the LCD panel.
2 When checking the settings on the LCD panel, this step is not necessary.
Picture
3 Turn the mode dial to DRIVE and press the shift button.
The DRIVE menu appears.