2 Charging the battery pack

￿

CHG lamp

AC Adaptor

￿

DC IN jack

Power cord

 

v mark

(mains lead)

 

 

 

1Connect the cable of the AC Adaptor (supplied) to the DC IN jack of the

GB

Cyber-shot Station (supplied).

 

 

2Connect the power cord (mains lead) to the AC Adaptor and plug the adaptor into the wall outlet (wall socket).

3Attach the camera on the Cyber-shot Station.

The CHG lamp lights on, and charging starts.

When the CHG lamp turns off, charging is finished (Full charge).

[ Charging time

Battery pack

Full charge time

NP-FR1

Approx. 240 min.

 

 

•Time required to charge a fully depleted battery pack (supplied) at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions.

•For details on battery usable time, see page 33.

•Even if the CHG lamp is not lit, the camera is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket).

•Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.

•If you do not operate the camera for a long time, disconnect the AC Adaptor both from the DC IN jack of the Cyber-shot Station and from a wall outlet (wall socket).

•Use a commercially available AC plug adaptor, if necessary, depending on the design of the wall outlet.

13