The flash does not work.

•The flash is set to (Flash forced off) (t step 5 in “Read This First”).

•You cannot use the flash when:

–Multi Burst, Burst or Exposure Bracket mode is selected (page 41).

– (High Sensitivity) or (Twilight) is selected in the Scene Selection.

–When the mode dial is set to .

• Set the flash to (Flash forced on) when

 

 

(Beach),

(High-Speed Shutter) or

 

 

 

 

 

(Landscape) is selected in the Scene Selection.

 

 

The close-up (Macro) function does not work.

• (Twilight) or (Landscape) is selected in the Scene mode (page 34).

The date and time are not displayed.

•While shooting, the date and time are not displayed. Only during playback, the date and time are displayed.

The date and time are recorded incorrectly.

•Set the correct date and time (t step 2 in “Read This First”).

The F value and shutter speed flash when you press and hold the shutter button halfway down.

•The exposure is incorrect. Correct the exposure (page 37, t step 5 in “Read This First” ).

The image is too dark.

•You are shooting a subject with a light source behind the subject. Select the metering mode (page 45) or adjust the exposure (page 37, t step 5 in “Read This First”).

•When the brightness of the finder backlight is too low, adjust the brightness of the EVF backlight (page 65).

The image is too bright.

•You are shooting a spotlighted subject in a dark location such as on a stage. Adjust the exposure (page 37, t step 5 in “Read This First”).

•When the brightness of the finder backlight is too high, adjust the brightness of the EVF backlight (page 65).

The image colors are not correct.

•Adjust the [Color Mode] to [Normal] (page 45).

Vertical streaks appear when you are shooting a very bright subject.

•The smear phenomenon is occurring. This phenomenon is not a malfunction.

96