Noise appears in the image when you view the screen in a dark place.
•The camera is attempting to increase the visibility of the screen by temporarily brightening the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
•Set [Red Eye Reduction] in the 
(Setup) menu to [On] (page 58).
•Shoot the subject at a distance closer than the recommended shooting distance using the flash (t step 5 in “Read This First”).
•Light the room and shoot the subject.
The outline of the subject turns blue.
•The peaking function is worked (page 40). If it is unnecessary, cancel the function.
Dots appear and remain on the screen.
•This is not a malfunction. These dots are not recorded (page 8, t “Read This First”).
Cannot shoot images in succession.
•The internal memory or “Memory Stick Duo” is full. Delete unnecessary images (t step 6 in “Read This First”).
•The battery level is low. Install charged batteries.
Viewing images
Refer to “Computers” (page 98) in conjunction with the following items.
Your camera cannot play back images.
•Press 
(t step 6 in “Read This First”).
•The folder/file name has been changed on your computer (page 78).
•When an image file has been processed by a computer or when the image file was recorded using a model other than that of your camera, playback on your camera is not guaranteed.
•The camera is in USB mode. Delete the USB connection (page 76).
The date and time are not displayed.
•
(Screen display switch) button is turned off (page 27).
The image appears rough right after playback starts.
•The image may appear rough right after playback starts due to image processing. This is not a malfunction.
Troubleshooting
97