76
The picture is out of focus. Your camera is not in macro recording mode when
you shoot a subject that is about 3 to 25 cm (1 3/16
to 927/32 inches) from the lens.
tSet the macro recording mode (page53).
tPress the zoom button to set to the W side.
The focus preset is selected.
tCancel the function (page 52).
The resizing function does
not work.
You cannot resize moving images, text images, Clip
Motion and uncompressed images.
Images recorded in TEXT
mode are blurry.
Light is not striking the subject evenly.
tAdjust so that the lighting strikes the subject
evenly.
You cannot record images
in TEXT mode.
The mode dial is set to .
tSet the mode dial to .
You cannot display a print
mark.
You cannot display print marks on moving images,
text images and Clip Motion images.
The picture is noisy. Your camera is placed near a TV or other
equipment that uses strong magnets.
tMove your camera away from the TV, etc.
The picture is too dark. You are shooting a subject with a light source
behind the subject.
tAdjust the exposure (page 53).
The brightness of the LCD screen is too low.
tAdjust the brightness of the LCD screen
(page70) .
The flash does not work. The flash is set to .
tSet the flash to auto (no indicator) or
(page24) .
The mode dial is set to .
tSet the flash to .
The mode dial is set to , SETUP or (MPEG
MOVIE).
tSet it to .
The date and time are
recorded incorrectly.
The date and time are not set correctly.
tSet the correct date and time (page15).
Vertical streaks appear
when you are shooting a
very bright subject.
The smear phenomenon is happening.
tThis is not a malfunction.
Symptom Cause and/or Solution