Digital Still Camera
Read This First
Operating InstructionsBefore operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate volume) thoroughly, and retain them for future reference.
DSC-R1
1Prepare the battery pack
Be sure to turn off your camera before charging starts.1Insert the battery pack.Bottom2
|
| 1 |
1 |
| 2 |
|
| |
| Battery eject lever |
|
Open the battery cover | Firmly insert the battery pack all | Close the battery cover |
| the way while pressing the |
|
| battery eject lever with the tip |
|
| of the battery |
|
| AC Adaptor | (wall socket) |
|
| |
|
| Power cord |
v mark |
| (mains lead) |
2Turn the camera on/set the clock
1 Select . 2 Set the POWER switch to ON sliding in the arrow direction.Lighting | OFF |
(Green) | POWER |
| ON |
1Select the date display format by moving the multi- selector to v/V, then press the center of the
Clock Set
Y/M/D
M/D/Y
D/M/Y
2005 / 1 / 1 12 : 00 OK
AM
Cancel
2 Select each item by moving to b/B and set the numeric |
value by moving to v/V, then press the center of the |
3Insert a recording medium (not supplied)
Available recording medium for the camera“Memory Stick” | “Memory Stick Duo” | Microdrive/ |
| (using Memory Stick Duo Adaptor) | CompactFlash |
You can use a “Memory Stick”, “Memory Stick Duo” (using Memory Stick Duo Adaptor) Microdrive, or CompactFlash card (CF card) as a recording medium.
| “Memory Stick” |
| Terminal side |
1 |
|
2 |
|
Open the “Memory Stick”/CF | Insert the “Memory Stick” all the way in until it clicks. |
card cover. |
|
Explains advanced techniques and what to do if you experience trouble with your camera.
•It takes approximately 180 minutes to charge a completely discharged battery pack using the AC Adaptor at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions.
•The lamp also lights up while charging the flash.Clock Set
|
|
|
|
|
|
|
|
|
| Y/M/D |
|
|
|
|
|
|
|
|
|
| M/D/Y |
|
|
|
|
|
|
|
|
|
| D/M/Y |
|
|
|
|
|
|
| : |
|
|
|
2005 | / | 1 | / | 1 |
| 12 | 00 |
| OK |
AM
Cancel
3Select [OK] by moving to B, then press the center of theClock Set
Y/M/D
M/D/Y
D/M/Y
2005 / 1 / 1 10 : 30 OK
AM
Cancel
2
1
Close the “Memory Stick”/CF card cover.Switching the recording mediumTerminal side
Insert the Microdrive/CF card all the way in from the connector side as shown in the illustration.
| Printed on 100% recycled paper using VOC |
© 2005 Sony Corporation Printed in Japan | (Volatile Organic |
oil based ink. |
• | • Lens hood (1) | • Shoulder strap (1) | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• Power cord (mains lead) (1) | • Lens cap (1) | • |
•Connect the AC Adaptor to an easily accessible wall outlet (wall socket). If any trouble occurs, immediately disconnect the plug from the wall outlet (wall socket).
•After use, disconnect the AC Adaptor both from the camera and from the wall outlet (wall socket).
•This set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket) even if the set itself has been turned off.
•Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
To check the remaining battery timeSet the POWER switch to ON to turn on and check the time on the LCD screen.Select [Clock Set] in the (Setup) screen and perform the procedure in step 3 above.
t“User’s Guide/Troubleshooting” (pages 32 and 82)On the clock display•If you selected [D/M/Y] in step•Unless you set the clock, the Clock Set screen appears each time the camera is turned on.
•The following screen appears when the camera is turned on for the second time or afterwards.
: When recording images onto a “Memory Stick” or playing back images from a “Memory Stick”.
CF: When recording images onto a Microdrive/CF card or playing back images from a Microdrive/CF card.
Microdrive/CompactFlashWe have checked the compatibility of following Microdrives.Hitachi Global Storage Technologies, Inc.We have checked the compatibility of CF cards compliant with CompactFlash Type I and Type II, however, we cannot guarantee proper operation of all CF cards.
| application software/Image |
| Data Converter SR) (2) |
| • Operating instructions: |
| “Read This First” (this |
| manual) (1) |
• Rechargeable battery pack | • USB cable (1) |
• Operating instructions: |
Remaining indicator | • It takes about one minute until the correct battery remaining | |
time appears. | ||
| ||
110min | • The displayed time remaining may not be correct under | |
certain circumstances. | ||
| ||
Remaining time |
|
110min 10M
M AF
94
• Copying between media cannot be done with this camera. |
• You can insert a “Memory Stick” and a Microdrive/CF card at the same time. However, you cannot record an |
image onto both the media simultaneously. |
• For more information about the “Memory Stick” t“User’s Guide/Troubleshooting” (page 122) |
• The Microdrive is a compact and lightweight hard disk drive that complies with CompactFlash Type II |
standards. For more information about the Microdrive t“User’s Guide/Troubleshooting” (page 124) |
“User’s Guide/ |
Troubleshooting” (1) |
• Video cable (1) |
•Charge the supplied
•The LCD screen and the LCD finder are manufactured using extremely
•The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc. t“User’s Guide/Troubleshooting” (page 18)
On carrying or storing–Close the LCD screen toward the body.–Set the zoom fully to the W position to put the lens in.–Attach the lens cap.Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website.
http://www.sony.net/Open the cover and slide the battery eject lever in the direction of the arrow. Be careful not to drop the battery pack.
Battery eject lever
To use your camera abroad — Power sourcesYou can use your camera and the AC Adaptor (supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b].
•Do not use an electronic transformer (travelconverter), as this may cause a malfunction. |
OFF
ON
POWER
•If the camera is running on battery power and you do not operate the camera for certain time, the camera turns to Power Save mode (POWER lamp: red) automatically to prevent wearing down the battery pack. To change the setting t“User’s Guide/Troubleshooting” (page 72)
Changing the language settingYou can change the screen display to show messages in a specified language. To change the language setting, press MENU to display the menu screen. Select (Setup) with the control button, then, select [A Language] in (Setup1), and select the desired language. t“User’s
1
Guide/Troubleshooting” (page 80)• Before using a Microdrive/CF card, be sure to format it using this camera. Otherwise, satisfactory |
performance may not be obtained. t“User’s Guide/Troubleshooting” (page 78) |
Open the “Memory Stick”/CF card cover, then push the “Memory Stick” in once or push the CF card eject lever so that the Microdrive/CF card is ejected.
When the access lamp is litNever open the “Memory Stick”/CF card cover or turn off the power. The data may be corrupted.
CF card eject leverAccess lamp