Reinstall the USB driver when using Windows 98, Windows 98SE, Windows Me and Windows 2000 Professional

Perform all steps without skipping.

1 Turn on your computer and allow Windows to load.

2 Connect the USB jack on the camera and the computer with the supplied USB cable.

3 Insert a “Memory Stick”.

4 Connect the AC power adaptor to your camera and then to a wall outlet (mains), and turn on the power of your camera.

5 Open “Device Manager” on Windows.

For Windows 98, Windows 98SE and Windows Me users:

1 Open [Control Panel] from [

My Computer], then double-click

[System].

 

2“System properties” is displayed. Click the [Device Manager] tab located at the top.

3Click [ Sony DSC] in [ Other devices], then click the [Delete (E)] button located at the lower-right corner.

For Windows 2000 Professional users:

*Log in with the permission of administrator.

1 Open [Control Panel] from [

My Computer], then double-click

[System].

 

2“System properties” is displayed. Click the [Hardware] tab located at the top, then click the [Device Manager (D)] button.

3Click [View] in [Device Manager], then click [Devices by type (E)].

4Right-click [ Sony DSC] in [ Other devices], then click [Delete (E)].

6 After the message appears to verify that you delete the device, click “OK.”

7 Turn off the camera, disconnect the USB cable, and restart the computer.

8 Install the USB driver in the supplied CD-ROM to the computer following the procedure on page 33.

information Additional

93