Sony DSC-TX9, DSC-TX9C To capture the basic white color in [One Push Set] mode, z

Table of
contents
Operation
Search
MENU/Settings
Search Index
75GB
• [White Balance] is not available in the following situations:
– In Intelligent Auto Adjustment mode
– In Supe rior Auto Adjustment mode
– In Backgr ound Defocus mode
– In Underwater i Sweep Panorama mode
–In Easy Mode
• [Flash] in [White Balance] is not available in the following situations:
– In Intelligent Sweep Panorama mode
– In 3D shoo ting mode
– In Movi e Mode
– When Scene Selection is set to (Anti Motion Blur), (Hand-held Twilight), (High
Sensitivity) mode
• Under fluorescent lights that flicker, the whi te balance function may not work correctly even th ough you
select [Fluorescent White Balance 1], [Fluorescent White Balance 2] or [Fluorescent White Balance 3].
• When shooting with a flash in other than [Flash] mode, [White Balance] is set to [Auto].
• When [Flash] is [On] or [Slow Synchro], the white balance can only be adjusted to [Auto], [Flash], [One
Push], or [One Push Set].
• [One Push Set] cannot be selected while charging the flash.
1Frame a white object such as a piece of paper filling the screen under the
same lighting conditions as you will shoot the subject.
2 t (White Balance) t [One Push Set] t [Capture]
The screen momentarily turns black, and when the white balance has been adjusted and stored
in the memory, the recording screen is displayed again.
• If the indicator flashes while shooting, the white balance is either not set or cannot be set. Use
automatic white balance.
• Do not shake or strike the camera while [One Push Set] is in progress.
• When [Flash] is set to [On] or [Slow Synchro], the white balance is adjusted to the condition with the
flash emitting.
• The white references loaded using [White Balance] and [Underwater White Balance] are stored
separately.
Notes
To capture the basic white color in [One Push
Set] mode
Notes
zEffects of lighting conditions
The apparent color of the subject is affected by the lighting conditions.
The color tones are adjusted automatically, but you can adjust color tones manually using
the White Balance function.
Weather/lighting Daylight Cloudy Fluorescent Incandescent
Characteristics of
light
White (standard) Bluish Green-tinged Reddish