Copying images to your computer

This section describes the process using a

The “InstallShield Wizard” screen

Windows computer as an example.

appears.

 

You can copy images from the camera to

• If the install menu screen does not appear,

your computer as follows.

double-click

(My Computer) t

 

(PICTUREPACKAGE).

For a computer with a “Memory Stick” slot

Remove the “Memory Stick” from the camera and insert the “Memory Stick” into the “Memory Stick” slot of the computer, then copy the images.

For a computer without a “Memory Stick” slot

Follow Stages 1 through 5 on pages 57 to 61 to copy images.

•Screens when copying images on a “Memory Stick” to a computer are used as examples.

Stage 1: Installing the USB Driver

•A driver is software that enable equipment connected to the computer to operate properly.

•When using Windows XP, start from Stage 2.

•When “PicturePackage” is already installed, Stage 1 is unnecessary.

NOTE: Do not connect the camera to the computer at this time.1 Shut down all application software in use.

•In Windows 2000, log on as Administrator (authorized Administrators).

3 Click [Next].

The USB driver installation starts. When the installation is finished, the screen informs you of completion.

4 Click the radio button next to [Yes, I want to restart my computer now] to select it, then click [Finish].

1

2

Your computer restarts. Now, you can establish a USB connection.

Remove the CD-ROM when the installation is completed.

computer your Using

2 Insert the CD-ROM into the computer, then click [USB Driver] when the install menu screen appears.

Stage 2: Preparing the camera and the computer

1 Insert a “Memory Stick” with recorded images into the camera.

57