Sony DSCH5B service manual Method for Copying or Erasing the Data in Internal Memory

1-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)

Note: 1 When replacing the SY-150 board, erase the data in internal memory of the board before replacement.

Note: 2 When replacing the SY-150 board or the IC202 on the SY-150 board, execute formatting and initialize the internal memory after replacement.

Method for copying the data in internal memory

Copy

Copies all images in the internal memory to a “Memory Stick Duo”.

OK

Cancel

See the following procedure.

Cancels the copying.

1Insert a “Memory Stick Duo” having 32 MB or larger capacity.

2Select [OK] with v on the control button, then press z.

The message “All data in internal memory will be copied Ready?” appears.

3Select [OK] with v, then press z. Copying starts.

Copying

102_COPY

•Use a fully charged Nickel-Metal Hydride battery or the AC Adaptor (not supplied). If you attempt to copy image files using a batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly corrupting the data.

•You cannot copy individual images.

•The original images in the internal memory are retained even after copying. To delete the contents of the

internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in

(Internal Memory Tool).

•You cannot select a folder copied on a “Memory Stick Duo”.

•Even if you copy data, a (Print order) mark is not copied.

Method for formatting the internal memory

This item does not appear when a “Memory Stick Duo” is inserted in the camera. The default settings are marked with .

Format

Formats the internal memory.

• Note that formatting irrevocably erases all data in the internal memory, including even protected images.

OK

Cancel

See the following procedure.

Cancels the formatting.

1Select [OK] with v on the control button, then press z.

The message “All data in internal memory will be erased Ready?” appears.

2Select [OK] with v, then press z. The format is complete.

•PROCESS AFTER FIXING FLASH ERROR

When “FLASH error” (Self-diagnosis Code E : 91 : ** ) occurs, to prevent any abnormal situation caused by high voltage, setting of the flash is changed automatically to disabling charge and flash setting.

After fixing, this setting needs to be deactivated. Flash error code can be initialized by the operations on the Setup screen.

Method for Initializing the Flash Error Code

Initialize

Initializes the setting to the default setting.

OK

Cancel

See the following procedure.

Cancels the resetting.

1Select [OK] with v on the control button, then press z. The message “Initialize all settings Ready?” appears.

2Select [OK] with v, then press z.

The settings are reset to the default setting.

Make sure that the power is not disconnected during resetting.

DSC-H5_L2

1-2