Sony DSCH5B service manual Precaution on Replacing the SY-150 Board, Video OUT Default Data Check

Ver. 1.1 2006. 06

1-3. PRECAUTION ON REPLACING THE SY-150 BOARD

•The Repair Board has already been adjusted. Re-initialization or EVR data copy from the set before repair is not required.

•Perform “VIDEO OUT Default Data Check” and “Initial Language Data Check” mentioned below, and also the adjustment items necessary after SY Board replacement.

1-4. VIDEO OUT DEFAULT DATA CHECK

When you replace to the repairing board, the written data of repairing board also might be changed to original setteing because of broadcast system (NTSC/PAL).

When the data has changed because of board replaceing etc., check the default data of VIDEO OUT if destination code is right. If not, rewrite to the right value.

VIDEO OUT Default Data

Page	Address		Data
		NTSC		PAL
4F	8D	00		01

Writing Method:

1)Select page: 00, address: 01, and set data: 01.

2)Select page: 4F, address: 8D, and set data: 00 (NTSC) or data: 01 (PAL).

3)Select page: 40, address: 38, and set data: 00.

4)Click [Save] on the SEUS screen.

5)Select page: 80, address: 34, and check that the data is “00”.

6)Select page: 80, address: 30, and check that the data is “00”.

7)Select page: 00, address: 01, and set data: 00.

1-5. INITIAL LANGUAGE DATA CHECK

If the SY-150 board was replaced, initial language setting may be changed. Accordingly, change the following data so as to set same initial language as that of the set distributing in each region.

Initial language: Language displayed at the next starting if the setting of Setup menu was reset.

It is different from the language setting selectable with the menu.

Initial Language Data

Page	Address	Data	Language	GP1	GP2	GP3	GP4
		00	English		z	z	z
		01	Japanese	z
		04	Spanish			z	z
4F	8C	06	Portugal				z
		08	Simplified Chinese				z
		0B	Russian			z
		0D	Korean				z

Note: GP1 is fixed to Japanese.

GP2 is fixed to English.

GP3 is either English, Spanish, or Russian.

GP4 is either English, Spanish, Portugal, Simplified Chinese, or Korean.

Writing Method:

1)Select page: 00, address: 01 and set data: 01.

2)Select page: 4F, address: 8C, and set the Initial Language Data.

3)Select page: 40, address: 38, and set data: 00.

4)Click [Save] on the SEUS screen.

5)Select page: 80, address: 34, and check that the data is “00”.

6)Select page: 80, address: 30, and check that the data is “00”.

7)Select page: 00, address: 01, and set data: 00.

8)Turn off the camera.

9)Turn on the camera. Execute “Initialize” of Setup screen.

10)Check the language displayed when the camera starts.

DSC-H5_L2

1-3E