Changing your setup
133
Changing the function of the AEL button
The function of the AEL button can be selected from the following two
functions:
– Holding the locked exposure value by pressing the AEL button while
the button is held down ([AEL hold]).
– Holding the locked exposure value by pressing the AEL button until the
button is pressed again ([AEL toggle]).
MENU button t 1 t [AEL button] t Select the desired
setting
Notes
• While the exposure value is locked, appears on the LCD monitor and in the
viewfinder. Be careful not to reset the setting.
• The “Hold” and “Toggle” settings affect the manual shift (page 68) in the manual
exposure mode.