152
Printing images

Specifying DPOF

Using the camera, you can specify the images and the number of images to
print before you print images at a shop or with your printer. Follow the
procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Notes
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
Specifying /unspecifying DPOF on selected images
1MENU button t 1 t [Specify Printing] t [DPOF setup]
t [Marked images] t [OK]
2Select the image with b/B on the controller.
3Select the number of sheets with the center of the controller.
• To unspecify DPOF, set the number to “0.”
4Press the MENU button.
5Select [OK] with v on the controller, then press the center of
the controller.