Others
159
The image is whitish (Flare).
Blurring of light appears on the image (Ghosting).
• The picture was taken under a strong light source, and excessive light has
entered the lens. Attach a lens hood.
The corners of the picture are too dark.
• If any filter or hood is used, take it off and try shooting again. Depending on
the thickness of the filter and improper attachment of the hood, the filter or
the hood may partially appear in the image. The optical properties of some
lenses may cause the periphery of the image to appear too dark (insufficient
light). In such cases, making the aperture smaller by 1 to 2 steps may
prevent this phenomenon.
Dots appear and remain on the LCD monitor.
• This is not a malfunction. These dots are not recorded (page 9).
The EV scale b B is flashing in the viewfinder.
• The subject is too bright or too dark for the metering ran ge of the camera.
Your camera cannot play back images.
• The folder/file name has been changed on your computer (p age 141).
• When an image file has been processed by a computer or when the image
file was recorded using a model other than that of your camera, playback on
your camera is not guaranteed.
• The camera is in USB mode. Delete the USB connection (page 139).
The image does not appear on the TV screen.
• Check [Video output] to see if the video output signal of your camera is set
to the color system of your TV (page100).
• Check whether the connection is correct (page 99).
Your camera cannot delete an image.
• Cancel the protection (page121).
Viewing imagesDeleting/Editing images