Preparing the camera
21
Attaching a lens
Notes
•The shutter is no t released if the lens is not attached, except when the mode dial is
set to M (page53).
•Using a DT lens i s not guaranteed because the corners of the field are darkened and
the camera does not meet the primary AE performance standard.
To remove the lens
1Remove the body cap from the camera and the rear cap from
the lens.
2Mount the lens by aligning the
orange index marks on the lens
and camera.
Orange index marks
3Turn the lens clockwise until it
clicks into the locked position.
• When attaching a lens, do not press the
lens release button.
• Be sure to put the lens on straight.
1Press the lens release button all
the way in and turn the lens
counterclockwise until it stops.
• When changing the lens, quickly
change the lens away from dusty
locations so as to keep dust from
getting inside the camera.
Lens release button