Sony DVP-C660 Receiver (Amplifier) Hookups

Started Getting

Receiver (Amplifier) Hookups

This connection is for listening to the sound through	Required cords
speakers connected to a receiver lacking a built-in DTS or
	Audio connecting cord (not supplied) (1)
Dolby* Digital decoder. Refer as well to the instructions
supplied with the component to be connected.	White (L)	White (L)
zYou can enjoy surround sounds even if you connect front	Red (R)	Red (R)

speakers only

You can use 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (VES: Virtual Enhanced Surround). For details, see page 37.

zIf you have a digital component with a built-in DTS or Dolby Digital decoder

You can enjoy multichannel surround sound by connecting the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied). For details on hookups and settings, see page 12.

*Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.

Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved.

CD/DVD player

S video cord (supplied) (1)

When connecting the cords, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Be sure to make connections firmly to avoid hum and noise.

If you have a digital component such as a receiver (amplifier) with a digital connector, DAT or MD, connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied).

Optical digital connecting cord (not supplied) (1)

Coaxial digital connecting cord (not supplied) (1)

			MEGA	COMPONENT VIDEO OUT
			CONTROL	Y PB/B-Y PR/R-Y
			PCM/DTS/
L		1	DOLBY DIGITAL	1	1
R		2		2	2
AUDIO IN	R	L	OUT	VIDEO	S VIDEO
	AUDIO OUT			OUT	OUT

To AUDIO	To DIGITAL	To S VIDEO
OUT	OUT	OUT		To an AC outlet
	(OPTICAL)
		To S VIDEO
	Take off the			TV
		input
	cap.
			INPUT
To				S VIDEO
DIGITAL			L
OUT			AUDIO
(COAXIAL)			R
		To optical digital input	DIGITAL IN	Receiver
				(Amplifier) with
	or		OPTICAL	a digital
				connector, MD
or				deck, DAT deck,
		To coaxial digital input	COAXIAL	etc.
			CD	Receiver
				(Amplifier)
			L
			R
: Signal flow		To audio input

10