Displaying the audio information of the
disc
When you select “AUDIO,” the channels being played are displayed on the screen.
For example, in Dolby Digital format, multiple signals ranging from monaural to 5.1 channel signals can be recorded on a DVD. Depending on the DVD, the number of the recorded channels may be different.
| 1 |
|
|
|
| PLAY |
| |
| 1 2 ( 2 7 ) |
|
|
|
| DVD |
| Current |
| 1 8 ( 3 4 ) |
|
|
|
|
|
| audio |
| C 0 1 : 3 2 : 5 5 |
|
|
|
|
| ||
|
|
|
|
| format* | |||
| 1: ENGLISH |
|
| PROGRAM FORMAT | ||||
|
|
|
| DOLBY DIGITAL 3/2.1 |
| |||
|
|
|
| L | C | R | Current | |
|
|
|
| |||||
|
|
|
|
| LFE |
| ||
|
|
|
|
|
| playing | ||
|
|
|
|
|
| |||
|
|
|
| LS |
|
| RS | program |
|
|
|
| |||||
AUDIO |
|
|
|
|
|
| format** | |
Select: | ENTER |
|
|
|
| |||
*“PCM,“ “DTS” or “DOLBY DIGITAL“ is displayed. In case of “DOLBY DIGITAL,” the channels in the playing track are displayed by numbers as follows:
For Dolby Digital 5.1 ch:
Rear component 2
DOLBY DIGITAL 3 / 2. 1
Front component 2 | LFE (Low |
+ Center component 1 | Frequency Effect) |
| component 1 |
**The letters in the program format display mean the following:
L:Front (left)
R:Front (right)
C:Center (monaural) LS: Rear (left)
RS: Rear (right)
S:Rear (monaural) – the rear component of the
Dolby Surround processed stereo signal and the Dolby Digital signal.
LFE: LFE (Low Frequency Effect)
The display examples are as follows: •PCM (stereo)
C 0 1 : 3 2 : 5 5 |
| |
1: ENGLISH |
| PROGRAM FORMAT |
|
| PCM 48kHz 24bit |
|
|
|
AUDIO
Select:
ENTER
•Dolby Surround |
| ||
|
| C 0 1 : 3 2 : 5 5 |
|
|
| 1: ENGLISH | PROGRAM FORMAT |
|
|
| DOLBY DIGITAL 2/0 |
|
|
| DOLBY SURROUND |
|
|
| L C R |
S
AUDIO
Select:
ENTER
•Dolby Digital 5.1ch
“LFE” appears only when a disc contains an LFE signal component. “LFE” remains on the “PROGRAM FORMAT” display even if the LFE signal component is not being output.
| C 0 1 : 3 2 : 5 5 |
|
| |||
| 1: ENGLISH |
|
| PROGRAM FORMAT | ||
|
|
|
| DOLBY DIGITAL 3/2.1 | ||
|
|
|
| L | C | R |
|
|
|
| |||
|
|
|
| LS | LFE | RS |
|
|
|
| |||
|
|
|
|
| ||
|
|
|
|
| ||
AUDIO |
|
|
|
|
| |
Select: | ENTER |
|
| |||
•DTS
“LFE” is always enclosed in a solid line regardless of the LFE signal component being output.
| C 0 1 : 3 2 : 5 5 |
|
| |||
| 1: ENGLISH |
|
| PROGRAM FORMAT | ||
|
|
|
| DTS 3/2.1 |
| |
|
|
|
| L | C | R |
|
|
|
| |||
|
|
|
| LS | LFE | RS |
|
|
|
| |||
|
|
|
|
| ||
|
|
|
|
| ||
AUDIO |
|
|
|
|
| |
Select: | ENTER |
|
| |||
Note
When the signal does not contain rear signal components such as LS, RS or S, the Virtual Enhanced Surround (VES) effect cannot be heard (page 37).
Menu Control the with Functions Various Using
35