Sony DVP-F5 manual 99

	Symptom	Remedy
	There is no sound.	• When you have made the connections using an audio
		connecting cord and play DTS sound tracks, no sound
		will come out (page 29).
		• Check that the headphones plug connected to the
		headphones jack is firmly connected to this player.
		• Check that the VOL dial is not set to “MIN.”
	Sound is noisy.	• Clean the disc.
		• There is a flaw on the disc.
		• When you have made the connections using an audio
		connecting cord and play a CD with DTS sound tracks,
Sound		sound noise will come out (page 29).
		• Check that this player is placed in a horizontal position
		and there is no mechanical vibration or shock.
	The sound loses its stereo effect	• Set “AUDIO” to “STEREO” in the Control Menu
	when you play a VIDEO CD or a	display (page 52).
	CD.
		• Make sure you connect the player correctly (pages 15,
		18, 21).
	The surround effect is difficult to	• Check the speaker connections (page 21).
	hear when you are playing a	Refer to the operating manual of your receiver
	Dolby Digital or MPEG sound	(amplifier).
	track.
		• Depending on the DVD, the output signal may not be
		the entire 5.1 channels. It may be monaural or stereo
		even if the sound track is recorded in Dolby Digital or
		MPEG format.
	The remote does not function.	• Remove any obstacles between the remote and the
		player.
		• Use the remote near the player.
		• Point the remote at the remote sensor on the player.
Operation
		• Replace all of the batteries in the remote with new ones
		if they are weak.
		• When using the battery pack, press POWER on the
		player to turn on it.
		• When using the battery pack and 10 minutes have
		passed after turning off the player, you cannot turn on
		the player with the remote.
		• Make sure you use the supplied remote.
			continued

Additional Information 99