Resuming Playback From

the Point Where You

Stopped the Disc (Multi-disc

Resume)

The player stores the point where you stopped the disc for up to 40 discs and resumes playback the next time you insert the same disc. The player remembers the stopped point of the disc even after you play other discs in the disc tray. When you store a resume playback point for the 41th disc, the resume playback point for the first disc is deleted.

H x

the player enters standby mode (DATA CD only).

To turn off the Multi-disc Resume function, set “MULTI-DISC RESUME” in “CUSTOM SETUP” to “OFF” (page 74). Playback restarts at the resume point only for the current disc in the player.

Notes

“MULTI-DISC RESUME” in “CUSTOM SETUP” must be set to “ON” (default) for this function to work (page 74).

The resume playback point for the current disc is cleared when:

you change the play mode.

you change the settings on the Setup Display.

Resume Play does not work during Shuffle Play and Program Play.

This function may not work with some discs.

If “MULTI-DISC RESUME” in “CUSTOM SETUP” is set to “ON” and you playback a recorded disc such as DVD-RW, the player may playback other recorded discs from the same resume point. To play from the beginning, press x twice and then press H.

1 While playing a disc, press x to stop playback.

“RESUME” appears on the front panel display.

2 Press H.

The player starts playback from the point where you stopped the disc in step 1.

zHints

To play from the beginning of the disc, press x twice, then press H.

For DVD-RWs in VR mode, CDs, Super Audio CDs, and DATA CDs, the player remembers the resume playback point for the current disc.

The point where you stopped is cleared when:

you press DISC SKIP or DISC SELECT.

you opened the disc tray.

you disconnect the power cord.

34