selects PCM, DTS, and Dolby Digital sound tracks in this order.

◆MULTI-DISC RESUME (DVD VIDEO/ VIDEO CD only)

Switches the Multi-disc Resume setting on or off. Resume playback point can be stored in memory for up to 40 different DVD VIDEO/ VIDEO CD discs (page 34).

ON

Stores the resume settings in

 

memory for up to 40 discs (The

 

settings remain in memory even

 

if you select “OFF.”)

 

 

OFF

Does not store the resume

 

settings in memory. Playback

 

restarts at the resume point only

 

for the current disc in the player.

 

 

◆CD DIRECT

Eliminates the use of unnecessary circuits when playing CDs. This setting will be activated when you open or close the disc tray.

This function affects the output from the following jacks:

–AUDIO OUT L/R 1/2 jacks

–5.1CH OUTPUT jacks

OFF

Select this when playing CD

 

discs, including CDs with DTS

 

tracks.

 

 

ON

Eliminates the use of

 

unnecessary circuits needed to

 

play CDs.

 

 

Settings for the Sound

(AUDIO SETUP)

“AUDIO SETUP” allows you to set the sound according to the playback and connection conditions.

Select “AUDIO SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 69).

The default settings are underlined.

AUDIO SETUP

AUDIO ATT:

 

OFF

AUDIO DRC:

 

STANDARD

AUDIO FILTER:

 

SHARP

DOWNMIX:

DOLBY SURROUND

DIGITAL OUT:

 

ON

DOLBY DIGITAL:

 

D-PCM

DTS:

 

D-PCM

48kHz/96kHz PCM:

48kHz/16bit

◆AUDIO ATT (attenuation)

If the playback sound is distorted, set this item to “ON.” The player reduces the audio output level.

This function affects the output of the following jacks:

–AUDIO OUT L/R 1/2 jacks

–5.1CH OUTPUT jacks

OFF Normally, select this position.

ON Select this when the playback sound from the speakers is distorted.

Note

If you select “ON” when playing CDs with DTS tracks, the sound will become noisy.

◆AUDIO DRC (Dynamic Range Control) (DVD only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “AUDIO DRC.” This affects the output from the following jacks:

– AUDIO OUT L/R 1/2 jacks

– 5.1CH OUTPUT jacks

– DIGITAL OUT (OPTICAL or COAXIAL) jack only when “DOLBY DIGITAL” is set to “D-PCM” (page 75).

STANDARD Normally select this position.

TV MODE

Makes the low sounds clear

 

even if you turn the volume

 

down.

 

 

WIDE

Gives you the feeling of being

RANGE

at a live performance.

74