6 Press ENTER.

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

 

SCREEN SETUP

 

 

 

TV TYPE:

16:9

 

 

SCREEN SAVER:

16:9

 

 

BACKGROUND:

4:3 LETTER BOX

 

 

4:3 OUTPUT:

4:3 PAN SCAN

 

 

 

 

 

 

 

 

7 Press X/x to select the setting that matches your TV type.

◆If you have a wide-screen TV or a 4:3 standard TV with a wide-screen mode

• 16:9 (page 69)

◆If you have a 4:3 standard TV

•4:3 LETTER BOX or 4:3 PAN SCAN (page 69)

8 Press ENTER.

The Setup Display for selecting the type of jack used to connect your amplifier (receiver) appears.

Is this player connected to an amplifier (receiver) ? Select the type of jack you are using.

YES

LINE OUTPUT L/R (AUDIO)

DIGITAL OUTPUT

NO

9 Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press

ENTER.

If you did not connect an AV amplifier (receiver), select “NO,” then go to step 13.

If you connected an AV amplifier (receiver) using just an audio cord, select “YES: LINE OUTPUT L/R (AUDIO),” then go to step 13.

If you connected an AV amplifier (receiver) using either a digital optical or coaxial cord, select “YES: DIGITAL OUTPUT.”

10Press X/x to select the type of

Dolby Digital signal you wish to send to your amplifier (receiver).

If your AV amplifier (receiver) has a Dolby Digital decoder, select “DOLBY DIGITAL.” Otherwise, select “D-PCM.”

 

AUDIO SETUP

 

 

 

 

AUDIO ATT:

 

OFF

 

 

AUDIO DRC:

 

STANDARD

 

 

DOWNMIX:

DOLBY SURROUND

 

 

DIGITAL OUT:

 

ON

 

 

DOLBY DIGITAL:

 

D-PCM

 

 

MPEG:

 

D-PCM

 

 

DTS:

 

DOLBY DIGITAL

 

 

48kHz/96kHz PCM:

48kHz/16bit

 

 

 

 

 

11Press ENTER.

“DTS” is selected.

 

AUDIO SETUP

 

 

 

 

 

AUDIO ATT:

 

 

OFF

 

 

AUDIO DRC:

 

STANDARD

 

 

DOWNMIX:

DOLBY SURROUND

 

 

DIGITAL OUT:

 

 

ON

 

 

DOLBY DIGITAL:

 

D-PCM

 

 

MPEG:

 

 

PCM

 

 

DTS:

 

 

OFF

 

 

48kHz/96kHz PCM:

 

OFF

 

 

 

 

 

ON

 

 

 

 

 

 

12Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver).

If your AV amplifier (receiver) has a DTS decoder, select “ON.” Otherwise, select “OFF.”

13Press ENTER.

Quick Setup is finished and connections are complete.

If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 72).

Hookups

21