Step 3: TV Hookups

Connect the supplied audio/video cord and power cord (mains lead) in the order (1~3) shown below. Be sure to connect the power cord (mains lead) last.

 

1 Audio/video cord

to video input

INPUT

 

 

(supplied)

 

VIDEO

(yellow)

 

 

 

L

(white)

 

 

 

AUDIO

 

 

 

 

R

(red)

 

 

to audio input

 

 

to LINE OUT

to LINE OUT

 

 

 

L/R (AUDIO)

(VIDEO)

 

 

 

R-AUDIO-L VIDEO

 

 

TV

 

 

2 Power source

 

 

CD/DVD Player

DIGITAL OUT

LINE OUT COMPONENT

Y

 

VIDEO OUT

PCM/DTS/MPEG/

S VIDEO

 

DOLBY DIGITAL

 

COAXIAL OPTICAL

OUT

CB

R-AUDIO-L VIDEO

 

 

 

CR

l: Signal flow

3 Power source

When connecting to a standard 4:3 screen TV

Depending on the disc, the image may not fit your TV screen.

If you want to change the aspect ratio, please refer to page 60.

When connecting to a monaural TV

Use a stereo-mono conversion cord (not supplied). Connect the LINE OUT (VIDEO) jack on the player to the TV’s video input jack, and connect the LINE OUT L/R (AUDIO) jacks to the TV’s audio input jack.

To change the colour system

The colour system of the player is set to NTSC or PAL. If the on-screen display of the player does not appear on the TV, change the colour system of the player (PAL or NTSC) so that a picture appears on your TV. To change the colour system, hold [/1 down

while pressing X on the player. The power indicator lights up in green and changes to red. Then release X.

16