Step 3: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. Select one of the patterns A through B, according to the input jack on your TV monitor, projector, or AV amplifier (receiver).
A |
| INPUT | B |
INPUT | (yellow) |
|
|
| Audio/video |
|
|
VIDEO | cord (not supplied) |
|
|
|
|
| TV |
L |
|
|
|
AUDIO |
|
|
|
R |
|
|
|
TV, projector, or AV |
| SCART cord | |
| (not supplied) | ||
amplifier (receiver) |
| ||
|
| ||
| (yellow) |
|
|
to LINE OUT (VIDEO) | to LINE | ||
|
| ||
| L C E N T E R |
|
|
l : Signal flow |
|
| CD/DVD player |
Connect the yellow plug of an audio/video cord (not supplied) to the yellow (video) jack. You will enjoy standard quality images.
Yellow | Yellow |
White (L) | White (L) |
Red (R) | Red (R) |
Hookups
Connect a SCART cord (not supplied). Be sure to make the connections firmly to avoid hum and noise. When you connect using the SCART cord, check that the TV conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP” in the Setup Display (page 63), use a SCART cord that conforms to each signal.
,continued 15