Sony DVP-NS530, DVP-NS730P Step 4: Connecting the Audio Cords, Select a connection, through, Hookups, speakers, (page 20), (page 22), (page 71), (page 23), Connection, B (page 21)

Step 4: Connecting the Audio Cords

Refer to the chart below to select the connection that best suits your system. Be sure to also read the instructions for the components you wish to connect.

Select a connection

Select one of the following connections, A	through	D .
Components to be connected	Connection		Your setup (example)
TV	A	(page 20)

• Surround effects: TVS DYNAMIC (page 50), TVS WIDE (page 50)

Stereo amplifier (receiver) and two speakers B (page 21)

• Surround effects: TVS STANDARD (page 50) orMD deck/DAT deck• Surround effects: TVS STANDARD (page 50).

AV amplifier (receiver) having a Dolby*	C	(page 22)
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 71)
AV amplifier (receiver) with digital input jacks	D	(page 23)
having a Dolby Digital, DTS**, or MPEG audio
decoder and 6 speakers
• Surround effects:
– Dolby Digital (5.1ch) (page 71)
– DTS (5.1ch) (page 71)
– MPEG audio (5.1 ch) (page 72)

*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories.

**“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Hookups

,continued 19