Sony DVP-NS530, DVP-NS730P Controlling other TVs with the remote, Controlling Your TV with the Supplied Remote, 17, 06, JVC, Note, Using, Sanyo, Sharp, Notes, TV [/1, You can, VOL +/–

Controlling Your TV with the Supplied Remote

You can control the sound level, input source, and power switch of your Sony TV with the supplied remote.

TV

Number	VOL
buttons

TV/VIDEO

You can control your TV using the buttons below.

By pressing	You can
TV [/1	Turn the TV on or off
VOL +/–	Adjust the volume of the TV
TV/VIDEO	Switch the TV’s input source
	between the TV and other
	input sources.

Note

Depending on the unit being connected, you may not be able to control your TV using all or some of the buttons on the supplied remote.

Controlling other TVs with the remote

You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer’s code.

1 While holding down TV [/1, press the number buttons to select your TV’s manufacturer’s code (see the table below).

2 Release TV [/1.Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer	Code number
Sony (default)	01	Using
Aiwa (default)	01
		Various
Grundig	11
Hitachi	24	Additional
JVC	33
LG	06
		Functions
Panasonic	17, 49
Philips	06, 08
Samsung	06
Sanyo	25
Sharp	29
Thomson	43
Toshiba	38

Notes

•If you enter a new code number, the code number previously entered will be erased.

•When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

•Depending on the unit being connected, you may not be able to control your TV using all or some of the buttons on the supplied remote.

61