B-2 C-2

• D-PCM (page 76)

D

•DOLBY DIGITAL (only if the amplifier (receiver) has a Dolby Digital decoder) (page 76)

13Press ENTER.

“DTS” is selected.

AUDIO SETUP

AUDIO ATT:

 

 

OFF

AUDIO DRC:

 

STANDARD

AUDIO FILTER:

 

 

SHARP

DOWNMIX:

DOLBY SURROUND

DIGITAL OUT:

 

 

ON

DOLBY DIGITAL:

 

 

OFF

MPEG:

 

 

ON

DTS:

 

 

OFF

48kHz/96kHz PCM:

48kHz/16bit

14Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver).

Choose the item that matches the audio connection you selected on pages 23 to 25 ( B through D ).

B-2 C-2

• OFF (page 77)

D

•ON (only if the amplifier (receiver) has a DTS decoder) (page 77)

15Press ENTER.

Quick Setup is finished. All connections and setup operations are complete.

If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 77).

Enjoying the surround sound effects

To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 23 to 25 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. See page 71 for using the Setup Display.

Audio Connection (pages 23 to 25)

A

• No additional settings are needed.

B-1 C-1

•Set “DOWNMIX” to “DOLBY SURROUND” (page 76).

B-2 C-2 D

•Set “DOWNMIX” to “DOLBY SURROUND” (page 76).

•Set “DIGITAL OUT” to “ON” (page 76).

28