Sony DVP-NS775V manual B-2, B-1

BConnecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an MD deck or DAT deck

If the stereo amplifier (receiver) has audio input jacks L and R only, use B-1 . If the amplifier (receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use B-2 . In this case, you can also connect the player directly to the MD deck or DAT deck without using your stereo amplifier (receiver).

CD/DVD player

COAXIAL OPTICAL	FRONT REAR CENTER	R-AUDIO-L	VIDEO	Y	PB	PR
	L

		S VIDEO
R	LINE OUT	OUT COMPONENT VIDEO OUT
PCM/DTS/	WOOFER
DOLBY DIGITAL
DIGITAL OUT	5.1CH OUTPUT

B-2		Optical digital cord				B-1
		(not supplied)
		Remove jack cap
		before connecting
COAXIAL	OPTICAL
				(red)	R-AUDIO-L	VIDEO
		or	or
PCM/DTS/				(white)	LINE OUT
DOLBY DIGITAL
DIGITAL OUT
to DIGITAL OUT				to LINE OUT L/R (AUDIO)
				Stereo audio cord
(COAXIAL or OPTICAL)
				(not supplied)
Coaxial digital cord
(not supplied)
			(white)	(red)
to coaxial or optical digital input				to audio input
	[Speakers]	Stereo amplifier (receiver)
	Front (L)
				MD deck/DAT deck

Front (R)

l: Signal flow

Note

Super Audio CD audio signals are not output from the DIGITAL OUT jacks.

26