Changing the password

1 Press DISPLAY while the player is in stop mode.

The Control Menu appears.

2 Press X/x to select (PARENTAL CONTROL), then press

ENTER.

The options for “PARENTAL

CONTROL” appear.

3 Press X/x to select “PASSWORD t,” then press ENTER.

The display for entering the password appears.

4 Enter your 4-digit password using the number buttons, then press ENTER.

5 Enter a new 4-digit password using the number buttons, then press ENTER.

6 To confirm your password, re-enter it using the number buttons, then press

ENTER.

If you make a mistake entering your password

Press C before you press ENTER and input the correct number.

Controlling Your TV or AV Amplifier (Receiver) With the Supplied Remote

By adjusting the remote signal, you can control your TV with the supplied remote. If you connect the player to an AV amplifier (receiver), you can control the volume with the supplied remote.

Notes

•Depending on the connected unit, you may not be able to correctly control your TV or AV amplifier (receiver) using some of the buttons below.

•If you enter a new code number, the code number previously entered will be erased.

•When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

Controlling TVs with the remote

TV/DVD

[/1

switch

Number

VOL +/–

 

buttons

TV/VIDEO

 

ENTER

1 Slide the TV/DVD switch to TV.

2 While holding down [/1, press the number buttons to select the manufacturer’s code for your TV (see the table below).

3 Release [/1.

Functions Additional Various Using

,continued 73