Resuming Playback From

the Point Where You

Stopped the Disc (Multi-disc

Resume)

The player stores the point where you stopped the disc for up to 40 discs and resumes playback the next time you insert the same disc. If you store a resume playback point for the 41st disc, the resume playback point for the first disc is deleted.

H x

Notes

•“MULTI-DISC RESUME” in “CUSTOM SETUP” must be set to “ON” (default) for this function to work (page 80).

•The point where you stopped playing is cleared when:

–you change the play mode.

–you change the settings on the Setup Display.

•For DVD-RWs in VR mode, CDs, Super Audio CDs, and DATA CDs, the player remembers the

resume playback point for the current disc. The resume point is cleared when:

–you opened the disc tray.

–you disconnect the power cord.

–the player enters standby mode (DATA CD only).

• Resume Play does not work during Shuffle Play and Program Play.

• This function may not work with some discs.

• If “MULTI-DISC RESUME” in “CUSTOM SETUP” is set to “ON” and you playback a recorded disc such as DVD-RW, the player may playback other recorded discs from the same resume point. To play from the beginning, press x twice and then press H.

1 While playing a disc, press x to stop playback.

“RESUME” appears on the front panel display.

2 Press H.

The player starts playback from the point where you stopped the disc in step 1.

zHint

To play from the beginning of the disc, press x twice, then press H.

36