13Press ENTER.
◆When “DIGITAL OUTPUT” is selected in Step 9
• Quick Setup is finished and
connections are complete.
• If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 76).
◆When “DIGITAL & 5.1CH OUTPUT” is selected in Step 9
• The Setup Display for “SPEAKER SETUP” appears.
14Press X/x to select the size of the centre speaker.
If no centre speaker is connected, select “NONE” (page 77).
SPEAKER SETUP
SIZE: |
|
|
|
|
|
| |
DISTANCE: |
|
|
|
|
|
| |
BALANCE: |
|
|
|
|
|
| |
LEVEL: | OFF | ||||||
TEST TONE: | |||||||
| FRONT: |
|
|
| LARGE | ||
| CENTER: |
|
|
|
| NONE | |
REAR:NONE
SUBWOOFER:LARGE
SMALL
15Press ENTER.
“REAR” is selected.
SPEAKER SETUP
SIZE: |
|
|
|
|
|
|
|
|
DISTANCE: |
|
|
|
|
|
|
|
|
BALANCE: |
|
|
|
|
|
|
|
|
LEVEL: | OFF | |||||||
TEST TONE: | ||||||||
FRONT: |
|
|
|
| LARGE | |||
CENTER: |
|
|
|
| LARGE | |||
REAR:NONE
SUBWOOFER:NONE
LARGE(REAR)
16Press X/x to select the size of the rear speakers.
If no rear speaker is connected, select “NONE.”
“SIDE” and “REAR” refer to the speaker position relative to your listening position (page 77).
17Press ENTER.
“SUBWOOFER” is selected.
| SPEAKER SETUP |
|
|
|
|
|
| ||
|
| SIZE: |
|
|
|
|
|
| |
|
| DISTANCE: |
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
|
| BALANCE: |
|
|
|
|
|
| |
|
| LEVEL: |
| OFF |
|
|
| ||
|
| TEST TONE: |
|
|
|
| |||
|
|
| FRONT: |
|
|
|
| LARGE | |
|
|
| CENTER: |
|
|
|
| LARGE | |
|
|
| REAR: |
|
| LARGE(REAR) | |||
|
|
| SUBWOOFER: |
|
|
| NONE | ||
|
|
|
|
|
|
|
|
| |
To set, press | , then ENTER . |
| NONE | ||||||
|
| YES | |||||||
|
|
|
|
|
|
|
|
|
|
18Press X/x to select whether or not you have connected a subwoofer.
19Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Enjoying the surround sound effectsTo enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 23 to 25 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. Refer to page 70 for using the Setup Display.
Audio Connection (pages 22 to 25)
A
• No additional settings are needed.
•Set “DOWNMIX” to “DOLBY SURROUND” (page 75).
•If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 75).
•Set “DOWNMIX” to “DOLBY SURROUND” (page 75).
•Set “DIGITAL OUT” to “ON” (page 75).
•Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency (page 76).
Hookups
,continued 29