Be sure to change the value in the Setup Display when you move the speakers.

The default adjustments are in parentheses.

FRONT

Set this between 1 and 15

(3 m)

metres in 0.2 metre increments.

 

 

CENTER

Set this within –1.6 and +0.6

(3 m)

metres of the “FRONT” setting

 

in 0.2 metre increments. For

 

example, if “FRONT” is set to 6

 

metres, “CENTER” can be set

 

between 4.4 and 6.6 metres.

 

 

REAR (3 m)

Set this between the “FRONT”

 

setting and –5 metres in

 

0.2 metre increments. For

 

example, if “FRONT” is set to 6

 

metres, “REAR” can be set

 

between 1 and 6 metres.

 

 

Notes

•If each of the front or rear speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker.

•Do not place the rear speakers farther away from your listening position than the front speakers.

•These settings do not affect the Super Audio CD Multi audio signals.

◆BALANCE

Varies the balance of the left and right speakers. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default adjustments are in parentheses.

FRONT

Set this between –6 dB [L] and

(0 dB)

+6 dB [R] (0.5 dB increments).

 

 

REAR

Set this between –6 dB [L] and

(0 dB)

+6 dB [R] (0.5 dB increments).

 

 

◆LEVEL

Varies the level of each speaker. Be sure to set “TEST TONE” to “ON” for easy adjustment.

The default adjustments are in parentheses.

FRONT (0 dB) Set this between –6 dB and 0 dB (0.5 dB increments).

CENTER

Set this between –12 dB and

(0 dB)

0 dB (0.5 dB increments).

 

REAR (0 dB) Set this between –12 dB and

 

0 dB (0.5 dB increments).

 

SUBWOOFER Set this between –10 dB and

(0 dB)

+10 dB (0.5 dB increments).

To adjust the volume of all the speakers at one time

Use the amplifier’s (receiver’s) volume control.

◆TEST TONE

The speakers will emit a test tone. Use this when you use the 5.1CH OUTPUT jacks and adjust the “BALANCE” and “LEVEL.”

OFF

The test tone is not emitted

 

from the speakers.

 

 

ON

The test tone is emitted from

 

each speaker in sequence while

 

adjusting balance or level.

 

 

Adjusting the speaker volume and level

1 Select “SPEAKER SETUP” in the Setup Display.

2 Select “TEST TONE” and set to “ON.”

You will hear the test tone from each speaker in sequence.

3 From your listening position, select “BALANCE” or “LEVEL” and adjust the value of “BALANCE” using C/c and “LEVEL” using X/x.

The test tone is emitted from both left and right speakers simultaneously.

4 Select “TEST TONE” and set to “OFF” to turn off the test tone.

Note

The test tone signals are not output from the digital jack.

Adjustments and Settings

79