Reducing the Picture Noise
(DNR: Digital Video Noise
Reduction)
You can make the picture clearer by reducing the picture noise.
1 2 3
4 5 6
7 8 9
0 
DNR
DNR
Press DNR.
Each time you press the button, the value for DNR changes as follows:
OFF m1 m2 m3
n
As the value increases, the picture noise will be reduced. However, afterimages may increase.
Notes
•Depending on the disc, the effect may be difficult to tell.
•The setting for DNR returns to OFF when:
–you turn the power off
–you open or close the disc tray
Playing Discs in Various Modes
Changing the Sounds Z
With DVDs on which multilingual sounds are recorded, you can select the language you want while playing the DVD.
With multiplex VIDEO CDs, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers. In this case, the sound loses the stereo effect.
AUDIO
CHANGE
Press AUDIO CHANGE while playing a disc.
Each time you press the button, the indication and the language/sound from the speakers change as follows:
pWhen playing a DVD
AUDIO 1 nAUDIO 2 n.....
n
AUDIO 1 : ENGLISH
pWhen playing a VIDEO CD or a CD | |||
|
|
|
|
| Press | Indication | You will hear |
|
|
|
|
| Once | 1/L | The sound of the left channel |
|
|
|
|
| Twice | 2/R | The sound of the right channel |
|
|
|
|
| Three times | 1/L 2/R | The standard stereo sound |
|
|
|
|
zYou can also use the menu to switch the sound for the VIDEO CD or the CD
Press MENU to display the menu. Then select “L/R/ STEREO” in “CUSTOM SETUP” to change the sound (page 43).
Notes
•Depending on the DVD, you may not be able to change the languages even if multilingual sounds are recorded on the DVD.
•If “DOLBY DIGITAL MODE” is set to “2” (page 43), the Dolby Digital
- you open or close the disc tray |
|
- you release Resume Play | 37EN |