Messages do not appear on the TV screen in the language you want.

/In the menu, select the language for the on- screen display in “OSD LANGUAGE” in “INITIAL SETUP.” (page 44)

The language for the sound cannot be changed when you play a DVD.

/Multilingual sound is not recorded on the DVD. /Changing the language for the sound is

prohibited on the DVD.

The language for the sub-titles cannot be changed when you play a DVD.

/Multilingual sub-titles are not recorded on the DVD.

/Changing the language for the sub-titles is prohibited on the DVD.

The sub-titles cannot be turned off when you play a DVD. /Depending on the DVD, you may not be able to

turn the sub-titles off.

The angles cannot be changed when you play a DVD.

/Multi-angles are not recorded on the DVD. /Change the angles when “ANGLE” appears on

the front panel display. (page 39)

/Changing the angles is prohibited on the DVD.

The aspect ratio of the screen cannot be changed though you set “VIDEO ASPECT RATIO” in “INITIAL SETUP” in the menu when you play a wide picture.

/The aspect ratio is fixed on your DVD.

The menu screen does not appear when you play a VIDEO CD.

/The VIDEO CD does not feature PBC functions. /Follow the correct operating procedure. (Also

refer to the instructions supplied with the disc.)

The sound loses stereo effect when you play a VIDEO CD or a CD.

/“1/L” or “2/R” appears on the front panel display.

On the remote, press AUDIO CHANGE repeatedly until “1/L 2/R ” appears. (page 37) In the menu, set “L/R/STEREO” in “CUSTOM SETUP” to “STEREO.” (page 42)

The player does not operate properly.

/Static electricity, etc. may affect the player's operation.

Disconnect the AC power cord once, then connect it again.

The picture jitters in Slow-motion Play mode.

/In the menu, set “PAUSE MODE” in “CUSTOM SETUP” to “AUTO.” (page 43)

The power is turned off automatically.

/The Auto Power Off function is activated. (If you do not operate the player or the remote for more than 30 minutes when a disc is not being played, the power will be automatically turned off.)

Additional Information

Specifications

CD/DVD player

Laser

Semiconductor laser

Signal format system

NTSC (for DVD and VIDEO CD)

 

PAL (for VIDEO CD)

Audio characteristics

Frequency response

DVD (PCM): 2 Hz to 22 kHz (±0.5 dB)

Signal-to-noise ratio

CD: 2 Hz to 20 kHz (±0.5 dB)

More than 107 dB

Harmonic distortion

Less than 0.0028 %

Dynamic range

More than 97 dB

Wow and flutter

Less than detected value

 

(±0.001% W PEAK)

Outputs and inputs

 

Jack

Maximum

Load impedance

 

type

output

 

 

 

level

 

 

 

 

 

LINE OUT

Phono

2 Vrms

Over 10 kilohms

(AUDIO 1, 2)

jacks

(at 50 kilohms)

 

 

 

 

 

DIGITAL OUT

Optical

–18 dBm

Wave length: 660 nm

(OPTICAL)

output

 

 

 

connector

 

 

 

 

 

 

DIGITAL OUT

Phono

0.5 Vp-p

75 ohms terminated

(COAXIAL)

jacks

 

 

 

 

 

 

LINE OUT

Phono

1.0 Vp-p

75 ohms,

(VIDEO)

jack

 

sync negative

 

 

 

 

S VIDEO OUT

4-pin mini

Y: 1.0 Vp-p

75 ohms,

 

DIN

 

sync negative

 

 

C: 0.286 Vp-p

75 ohms terminated

 

 

 

 

General

Power requirements

220 to 240 V AC, 50 Hz

Power consumption

26 W

Dimensions (approx.)

430 × 111 × 395 mm (w/h/d)

Mass (approx.)

incl. projecting parts

6.0 kg

Operating temperature

5 ˚C to 35 ˚C

Operating humidity

5 % to 90 %

Supplied accessories

See page 6.

Design and specifications are subject to change without notice.

47EN