1-6 DVS-9000/9000SF
1-4-2. Installing the Connector Board
1. Remove the two screws and remove the blank panel.
m
.To install the connector board into the slot in which
the other board is installed already, loosen the two
fixing screws and remove the connector board that is
installed already.
.Store the removed blank panel in a safe place.
Blank panel
B3 x 5
B3 x 5
5. While closing the eject levers in the direction of arrow
1, push in the plug-in board.
6. Attach the plug-in board loose-proof assembly and the
front panel by reversing the installation steps of 2, 3.
DVS-9000 option
Name of option Name of board
Slot on the front side
BKDS-9160 OUT-26 board 16
BKDS-9210 MIX-46 board 6, 7
DVS-9000SF option
Name of option Name of board
Slot on the front side
BKDS-9210 MIX-46 board 6
Eject lever Eject lever
1
1
1-4. Installing the Options
(The illustration shows the DVS-9000.) (The illustration shows the DVS-9000.)