3-2 BKDW-515
ITEM DATA Description
No. ITEM No. DATA
F13 TRACKING 0 off Select whether the tracking control operation with search dial is enabled or not
CONTROL VIA 1 on during DT head playback.
SEARCH DIAL This item is prepared exclusively for DT adjustment and tracking adjustments.
After adjustment is completed, return to the factory setting ‘0 (off)’.
0: Tracking control function is disabled during DT head playback.
1: Tracking control function is enabled by rotating the search dial during PLAY
mode.
F15 ANALOG TAPE 0 disable Enables LTC to be inserted in an analog tape (Betacam SP)
LTC INSERT 1 enable 0: Inhibits insertion of LTC in an analog tape (factory setting)
1: Enables LTC to be inserted in an analog tape
Note:
When set to “enable”, TC insert operation is executed even though the REC inhibit
tab of an analog tape used is set to REC INHIBIT.
F16 DEVICE TYPE 0000 0 Determines the response data for the 9 pin remote command
MODIFY:0H 0001 1 DEVICE TYPE REQUEST (00h, 11h).
| | 0000: Returns the original device type data of the DVW.
FFFF FFFF Except 0000: Returns the values numeric as it is.
The higher-order two digits are DATA-1.
The lower-order two digits are DATA-2.
Note:
The whole operations of the VTR including TTP is not influenced at all even if this
item is set to “0000” or “except 0000”.
For except DATA: 0000 (factory setting), the control from 9 pin is not guaranteed.
3-1. ITEM-F Series