1-1
BKDW-515
n
The BKDW-515 cannot be installed in the BKDW-511
Control Panel Case.

for DVW-A500/1, DVW500/1,

DVW-A500P/1, DVW-500P/1

1-1. Installation of Control Panel

1. Fix a dummy panel for shipping use at 90 degrees.
2. Loosen the two black screws on the dummy panel.
(Loosen the screws until screw’s top are exposed from
the surface of the dummy panel.)
3. While pushing the loosened black screws in the
direction of the arrow, remove the dummy panel
assembly from the arms.
Section 1Installation
4. Fix the both arms at 45 degrees.
5. Connect the harness of the control panel to the connec-
tor (CN580) on the system set-up panel.
6. Set the notches of the control panel to the claws of the
arms, and push the control panel until making a click
sound.
n
Push the head of the two screws when the hook does
not move smoothly and when the panel is difficult to
attach. This facilitates the attaching.
7. Then tighten the two screws.
Screw
(B3x12)
Dummy panel
Screw(B3x12)
CN580
Notches
Control panel Screw
(B3x12)
Claws
Claws
Notches