aWireless receiver slotInsert the optional DWR-S01D or WRR- 855 here.

For details on how to attach the receiver or tuner unit to the DWA-01D, see “Attaching the receiver/ tuner unit” on page 22.

bWireless receiver screw holes Run in the mounting screws to secure the receiver/tuner unit.

cMonitor output selectorSelects the audio output from the PHONES connector.

1:Outputs the audio from the OUTPUT1 connector to the L/R channels.

1+2: The audio from the OUTPUT1 connector is mixed with the audio from the OUTPUT2 connector (only when the OUTPUT2 connector is set to output analog signal) and output to the L/R channels.

2:Outputs the audio from the OUTPUT2 connector (only when the OUTPUT2 connector is set to output analog signal) to the L/R channels. When the WRR-855 is attached, no audio is output from the PHONES connector.

Note

Monitor output is split from the analog signal output to the OUTPUT1/2 connectors. When audio that is output to the OUTPUT1 connector is changed on the DWR-S01D using the ANALOG OUTPUT1 function, monitor output changes accordingly.

dPHONES (monitor output)connector (3.5 mm, TRS jack, tip: L,ring: R, sleeve: ground)

Connect the headphones here. Select the output signal using the monitor output selector.

eMonitor level control Adjusts the monitor output level.
fAudio monitor section cover

This is a cover for the jack and controls of the audio monitor section. When you do not use the headphones, close this cover.

gJoint bracketCombines two DWA-01D adapters.

For details on how to combine two DWA-01D adapters, see “Combining two DWA-01D adapters” on page 23.

hV-shaped mount bracketThis is a bracket used for attaching to the camcorder.

Bottom

aDC IN (external power input)connector (4-pin)

Connect to the external power output connector of the camcorder using the supplied DC power cable. This connector accepts the power voltage between 10 V DC and 17 V DC.

bWORD SYNC (word sync input) connector (BNC type)Accepts external sync signal.

When the DWR-S01D is attached and the sync signal is input, the DWR-S01D can be operated in synchronization with the whole audio system. In order for the DWR-S01D

20

Parts identification