35
Using Presentation Function via Network
Presentation Function via Network
You can project JPEG images, PDF files, etc.
stored in a tablet PC/smartphone wirelessly
by using a specific application.*1
For downloading*2 or detailed method of
using the application, access the following
URL.
http://PWPresenter.pixelworks.com
*1: To use the application, one of the following
conditions is required.
• Connected to network where wireless
connection can be established (page 9).
• Connected to a wireless network via USB
wireless LAN module IFU-WLM3
(supplied) that is connected to the
projector (page 9).
*2: Depending on your Internet connection, a
data communication fee for downloading
the application may apply.
Using the Controller
Items Functions
Start projecting an image.
Pause projecting an image.
Stop projecting an image
(screen turns black).
Change the application
settings.
Disconnect from the
projector.
Select a projection method
then start projecting an
image.
Projection
method
Not projecting an image.
Project in full screen.
Project in the left half of
the screen.
Project in the right half of
the screen.
Project in the upper left
quadrant of the screen.
Project in the upper right
quadrant of the screen.
Project in the lower left
quadrant of the screen.
Project in the lower right
quadrant of the screen.
Display the strength of the
wireless signal.
Display the number of
users connected to the
projector.
Display the users’ status.