When configuring a
For connections, see “Connecting Two or More Cameras – Multi Camera System” on page 51.
Connecting the cameras to video equipment with phase indication capability
When connecting to a
1 Turn on the phase indication capability of the connected video equipment.
2 Adjust the horizontal phase using the menu. Select H. PHASE from the SYSTEM menu.
For more details, see “Operation through Menu” on page 14.
3 Adjust the subcarrier phase using the menu. Select SC. PHASE from the SYSTEM menu. First adjust the subcarrier phase roughly with SC. PHASE ROUGH by setting to between 0° and 180°, then adjust it finely using SC. PHASE FINE.
For more details, refer to the instruction manual of the connected video equipment with phase indication capability.
Connecting the cameras to video equipment without phase indication capability
Use one of the cameras as a reference camera and adjust the |
|
|
| ||
other cameras to the reference camera one by one. | Chapter | |
1 Adjust the horizontal phase. Select H. PHASE from the | ||
SYSTEM menu, and adjust so that the reference video | 2 | |
| ||
signal and the output signal have the same horizontal |
| |
sync phase. Use a waveform monitor or an oscilloscope |
| |
to check the phase. |
| |
2 Adjust the subcarrier phase. Select SC. PHASE from the |
| |
SYSTEM menu. |
| |
First adjust the subcarrier phase roughly with SC. |
| |
PHASE ROUGH by setting to between 0° and 180°, |
| |
then adjust it finely using SC. PHASE FINE so that the |
| |
reference video signal and the output video signal have |
| |
the same subcarrier phase. Use a vectorscope or the |
| |
wiping function of a |
| |
the images of both the reference camera and the camera |
| |
to be adjusted simultaneously on the screen. |
|
Chapter 2 Operation 41 (GB)