Sony DXC-390, DXC-390P manual 27

TRIGGER

Set when you use a slave unit connected to the TRIG IN connector and synchronize the camera with a stroboscope.

Selection	Function
OFF	Select when you do not connect a slave unit.
ON	Select when you connect a slave unit.
	Select POLARITY, and set it to the same polarity as
	the input pulse signal.
		: Falling edge
		: Rising edge

NEGA

Reverses the output image to negative/positive.

Selection	Function
OFF	Outputs the image normally.
ON	Outputs the image reversed to negative/positive.

FLICKER CANCELLER

When using the camera in a 50 Hz lighting area (DXC-390) or in a 60 Hz lighting area (DXC-390P), you can obtain images with less flicker under fluorescent light even when SHUTTER is set to CCD IRIS or OFF. Set this item to OFF when you want to set NEGA to ON.

Selection	Function
OFF	Disables the FLICKER CANCELLER function.
ON	Reduces flicker.

SYSTEM menu

Sets the items relating to the system of the camera and selection of output signals.

		<SYSTEM>						[A]
		>BAUD RATE						9600
			D-SUB VIDEO					VBS
			D-SUB SYNC					C.SYNC
			RGB SYNC					G
			12P CONNECTOR					IN
					Select		Back
						MENU
Setting items in the SYSTEM menu
Setting item	Contents of setting								Ref. page
BAUD RATE	Selects the baud rate.								28
D-SUB VIDEO	Switches the video signal output from								28
	the				RGB/SYNC connector (D-
	sub 9-pin).
D-SUB SYNC	Switches the sync signal output from								28
	the				RGB/SYNC connector (D-
	sub 9-pin).
RGB SYNC	Adds a sync signal to the RGB output.								29
12P	Switches the input and output of the								29
CONNECTOR				DC IN/VBS			connector and
	selects the output signal.

(Continued)

2 Chapter

Chapter 2 Operation 27 (GB)