Setup Menu Operations
40
Settings
The Setup menu allowing you to perform various
settings that are needed for recording and playing,
appears on the LCD/viewfinder screen by
pressing the MENU button. (You can display the
Setup menu on the external video monitor.)

Menu controls

MENU button (page16)
To turn the menu mode to use the setup menus on/
off.
SEL/SET dial (page16)
When you turn the dial, the cursor moves up or
down, permitting you to select menu items or
setting values.
Press the SEL/SET dial to select the highlighted
item.
CANCEL/BACK button (page16)
To return to the previous menu. An uncompleted
change is canceled.
V/v/B/b SET button
When you press the V/v/B/b buttons, the cursor
moves in the corresponding direction, permitting
you to select menu items or setting values.
Press the SET button to enter the highlighted
item.
Notes
• In Focus Magnifier mode (page 28), the setup menu
cannot be used.

Setting the Setup menus

Turn the SEL/SET dial to set the cursor to the
item of the menu you wish to set, then press the
SEL/SET dial to select that item.
• The menu item selection area can show 9 lines
at maximum. When all the selectable items
cannot be displayed at one time, you can scroll
the display up or down by moving the cursor.
• For items having a wide range of available
values (example: –99 to +99), the available
value area is not displayed. The current setting
is highlighted instead, indicating that the setting
is ready for change.
• When you select “Execute” for an execution
item, the corresponding function is executed.
• When you select an item that you must confirm
before execution, the menu display temporarily
disappears, and a confirmation message is
displayed. Follow the instructions of the
message, and specify whether to execute or
cancel.

Settings

Setup Menu Operations