Sony FDRAX1 Error/Warning Indications

Error/Warning Indications 61

Appendices

The camcorder informs you of situations where warning, caution, or an operation check is required,

through messages on the LCD/viewfinder screen, the recording lamp, and a buzzer.

The buzzer is output to the headphones connected via the h eadphone connector.

The camcorder stops operation after the following indications.

When one of the following indications is generated, follow the message to resolve the problem.

Error/Warning Indications

Error indications

Error indication on

LCD/viewfinder

Buzzer Recording

lamp

Cause and measures

C:04:ss The battery pack is not an “InfoLITHIUM” battery pack. Use

an “InfoLITHIUM” battery pack (page 54).

C:06:ss The battery pack temperature is high. Change the battery

pack or place it in a cool place.

C:32:ss Remove the power source. Reconnect it and operate your

camcorder again.

E:20:ss/E:40:ss/

E:41:ss/E:50:ss/

E:51:ss/E:61:ss/

E:62:ss/E:92:ss/

E:94:ss/E:95:ss

Perform the following steps.

1Check the list, and inspect your camcorder.

2Disconnect the power source, attach the power source again

after about 1 minute, and turn the camcorder on.

3Contact your Sony d ealer or local authorized Sony service

facility.

Warning indications

Warning indication

on LCD/viewfinder

Buzzer Recording

lamp

Cause and measures

Media Near Full Intermittent Flashing Free space on the XQD memory card has become

insufficient.

Replace it with another at the earliest opportunity.

Media Full Continuous Rapidly

flashing

No space is left on the XQD memory card. Recording, clip

copying and clip division cannot be performed.

Replace it with another.

Battery Near End Intermittent Flashing The battery power will be discharged soon.

Charge the battery pack at the earliest opportunity.

Battery End Continuous Rapidly

flashing

The battery pack is discharged. Recording cannot be

performed.

Stop operation and change the battery pack.

Battery Temperature

High

Turn Power Off

The temperature of the battery pack has risen above a safe

operation limit.

The camcorder turns off automatically.

Temperature High Intermittent Flashing The internal temperature has risen above a safe operation

limit.

Suspend operation, turn off the power, and wait until the

temperature falls.

Battery Error

Please Change Battery

An error was detected with the battery pack.

Replace the battery pack with a normal one.

Contents

Main Owners Record WARNING IMPORTANT SAFETY INSTRUCTIONS Representative plug of power supply cord of countries/regions aroun d the world. For only the United States Use a supplied power cord. Europe Asia Oceania North America Central America South America Africa Middle East Battery pack CAUTION For customers in the U.S.A. and CANADA Regulatory Information CAUTION Note For the customers in the U.S.A. For Customers in EUROPE Page Table of Contents Overview Preparations Recording Thumbnail Screens Settings External Devices Connection Appendices Overview Location and Function of Parts Page Page Page Bottom Status screen Location and Function of Parts 17 Overview Displays the video signal settings. Camera status screen Displays the electronic shutter settings or the status of the lens. Audio status screen Displays the input settings for each channel, audio level meter, and wind filter setting. System status screen Location and Function of Parts Overview On-Screen Indications LCD/viewfinder screen Page 1 2 the Charger and the wall outlet (wall socket). 3 Charger, press it down, and slide it in the direction of the arrow. Power Supply Charging the battery pack Storing the battery pack Charging time On the battery pack Using a wall outlet (wall socket) as a power source 1. Setting the Clock Attaching Devices Attaching the lens hood with lens cover LCD screen Viewfinder Adjusting the LCD screen and viewfinder 1 2 clicks into place with the XQD label facing to the left. Removing an XQD memory card 3 Using XQD Memory Cards About XQD memory cards Inserting an XQD memory card Selecting the memory card slot to be used for recording Replacing an XQD memory card Formatting an XQD memory card Checking the remaining time available for recording 1 are attached to the camcorder and power is supplied to them. Adjusting the zoom Basic Operation Procedure Adjusting the focus manually 1 playback control buttons. focus. FOCUS switch B to MAN. 2 3 PREV or NEXT button. 4 Monitoring audio Cueing Up Changing Basic Settings Recording format Adjusting the image brightness Adjusting the shutter speed 2. 3. Adjusting to natural color (White balance) 1 AUTO/MANUAL switch D to MANUAL. 2 3 B to any one of PRESET/A/B. 1. Audio setup Adjusting the volume 1. 2. Setting the headphone sound Changing functions Useful Functions Assignable buttons 1. 2. 3. Thumbnail Screens Configuration of the screen 1 move the cursor to the thumbnail image of the clip with which you wish to start playback. Operations of the thumbnail menu Playing Clips Playing the selected and subsequent clips in sequence Clip Operations Displaying the detailed information of a clip Deleting clips Changing information on the thumbnail screen Menu controls Setting the Setup menus Settings Setup Menu Operations Setup Menu List 41 Setup Menu List Camera menu Camera Menu items Sub items and setting values Contents Gain Auto Exposure Paint menu Paint Menu items Sub items and setting values Contents White Offset White Gamma Setup Menu List 43 Skin Detail Matrix Audio menu Audio Menu items Sub items and setting values Contents Audio Input Audio Output Video menu LCD/VF menu LCD/VF Menu items Sub items and setting values Contents LCD Setting VF Setting Peaking Media menu Media Menu items Sub items and setting values Contents Format Media System menu System Menu items Sub items and setting values Contents Thumbnail menu Thumbnail Menu items Sub items and setting values Contents Display Clip Properties Delete Clip HDMI OUT connector (Type A connector) Connecting External Monitors and Recording Devices Managing Clips with a Computer 49 External Devices Connection To use an XQD card reader (sold separately) SET dial. Managing Clips with a Computer Connecting with a USB cable 1 using an Internet browser on your computer, then click Install t Run. www.sony.net/pm 2 Playing Images on a Computer Software for Mac What you can do with PlayMemories Home software (Windows) Checking the computer system Installing the PlayMemories Home software in your computer Editing images on a computer 1. 2. 3. Using a nonlinear editing system Important Notes on Operation Recording time of movies Page Using your camcorder abroad Use and Storage Shipping Care of the unit About the InfoLITHIUM battery pack Page About handling of your camcorder Removing dust from inside the viewfinder 1 2 viewfinder with a blower. To prevent electromagnetic interference from portable telephones, wireless devices, etc. About the LCD screen About the stuck pixels Formats and Limitations of Outputs Video formats and output signals Output formats from the VIDEO OUT connector Error/Warning Indications Error indications Warning indications Error/Warning Indications Appendices Warning indication on LCD/viewfinder Cause and measures Buzzer Recording lamp Licenses Specifications On accessing software to which the GPL/LGPL applies Open software licenses Page Package configuration On trademarks A C D Index I L M N P R S T U