Manuals / Brands / Photography / Camcorder / Sony / Photography / Camcorder

Sony FDRAX1 Warning indication on LCD/viewfinder, Cause and measures, Buzzer Recording lamp

1 68

Download 68 pages, 3.51 Mb

Error/Warning Indications

62

Appendices

*“Media(B)” for the card in slot B.

Unknown Media(A)*

Please Change

A partitioned memory card or one that contains recorded

clips exceeding the number permitted with this camcorder is

loaded.

This card cannot be used with this camcorder. Remove it and

load a compatible card.

Media Error

Media(A) Needs to be

Restored*

An error occurred with the memory card. The card requires

restoration.

Remove the card, load it again, and restore it.

Media Error

Cannot Record to

Media(A)*

Recording cannot be done, because the memory card is

defective.

Because playback may be possible, it is recommended to

replace it with another card after copying the clips, as

required.

Media Error

Cannot Use Media(A)*

Neither recording nor playback can be done, because the

memory card is defective.

It cannot be operated with this camcorder. Replace it with

another card.

Will Switch Slots Soon This is an advanced notice that the camcorder will switch

from the current memory card to the other memory card for

continuous recording.

Cannot Use Media(A)*

Unsupported File

System

A card of a different file system or an unformatted card was

inserted. It cannot be used with this camcorder.

Replace it or format it with this camcorder.

Media Error

Playback Halted

An error occurred in reading data from the memory card, and

playback cannot be continued.

If this frequently occurs, change the memory card after

copying the clips, as required.

Media(A) Error* Recording cannot be done, because an error occurred with the

memory card.

If this frequently occurs, change the memory card.

Media Reached

Rewriting Limit

Change Media(A)*

The memory card comes to the end of its service life. Make a

backup copy and replace the card with another one as soon as

possible. Recording/playback may not be performed properly

if you continue to use the card.

For details, refer to the operating instructions of the memory

card.

Cannot Use Media(A)*

Unsupported File

System

A memory card with different file system is inserted.

Replace the card, format it with the camcorder.

Battery Temperature

High

Intermittent Flashing The temperature of the battery pack is rising.

Turn off the power and replace the battery pack with another

one or wait until the temperature falls.

Warning indication on LCD/viewfinderBuzzer Recording lampCause and measures

Contents

Main Owners Record WARNING IMPORTANT SAFETY INSTRUCTIONS Representative plug of power supply cord of countries/regions aroun d the world. For only the United States Use a supplied power cord. Europe Asia Oceania North America Central America South America Africa Middle East Battery pack CAUTION For customers in the U.S.A. and CANADA Regulatory Information CAUTION Note For the customers in the U.S.A. For Customers in EUROPE Page Table of Contents Overview Preparations Recording Thumbnail Screens Settings External Devices Connection Appendices Overview Location and Function of Parts Page Page Page Bottom Status screen Location and Function of Parts 17 Overview Displays the video signal settings. Camera status screen Displays the electronic shutter settings or the status of the lens. Audio status screen Displays the input settings for each channel, audio level meter, and wind filter setting. System status screen Location and Function of Parts Overview On-Screen Indications LCD/viewfinder screen Page 1 2 the Charger and the wall outlet (wall socket). 3 Charger, press it down, and slide it in the direction of the arrow. Power Supply Charging the battery pack Storing the battery pack Charging time On the battery pack Using a wall outlet (wall socket) as a power source 1. Setting the Clock Attaching Devices Attaching the lens hood with lens cover LCD screen Viewfinder Adjusting the LCD screen and viewfinder 1 2 clicks into place with the XQD label facing to the left. Removing an XQD memory card 3 Using XQD Memory Cards About XQD memory cards Inserting an XQD memory card Selecting the memory card slot to be used for recording Replacing an XQD memory card Formatting an XQD memory card Checking the remaining time available for recording 1 are attached to the camcorder and power is supplied to them. Adjusting the zoom Basic Operation Procedure Adjusting the focus manually 1 playback control buttons. focus. FOCUS switch B to MAN. 2 3 PREV or NEXT button. 4 Monitoring audio Cueing Up Changing Basic Settings Recording format Adjusting the image brightness Adjusting the shutter speed 2. 3. Adjusting to natural color (White balance) 1 AUTO/MANUAL switch D to MANUAL. 2 3 B to any one of PRESET/A/B. 1. Audio setup Adjusting the volume 1. 2. Setting the headphone sound Changing functions Useful Functions Assignable buttons 1. 2. 3. Thumbnail Screens Configuration of the screen 1 move the cursor to the thumbnail image of the clip with which you wish to start playback. Operations of the thumbnail menu Playing Clips Playing the selected and subsequent clips in sequence Clip Operations Displaying the detailed information of a clip Deleting clips Changing information on the thumbnail screen Menu controls Setting the Setup menus Settings Setup Menu Operations Setup Menu List 41 Setup Menu List Camera menu Camera Menu items Sub items and setting values Contents Gain Auto Exposure Paint menu Paint Menu items Sub items and setting values Contents White Offset White Gamma Setup Menu List 43 Skin Detail Matrix Audio menu Audio Menu items Sub items and setting values Contents Audio Input Audio Output Video menu LCD/VF menu LCD/VF Menu items Sub items and setting values Contents LCD Setting VF Setting Peaking Media menu Media Menu items Sub items and setting values Contents Format Media System menu System Menu items Sub items and setting values Contents Thumbnail menu Thumbnail Menu items Sub items and setting values Contents Display Clip Properties Delete Clip HDMI OUT connector (Type A connector) Connecting External Monitors and Recording Devices Managing Clips with a Computer 49 External Devices Connection To use an XQD card reader (sold separately) SET dial. Managing Clips with a Computer Connecting with a USB cable 1 using an Internet browser on your computer, then click Install t Run. www.sony.net/pm 2 Playing Images on a Computer Software for Mac What you can do with PlayMemories Home software (Windows) Checking the computer system Installing the PlayMemories Home software in your computer Editing images on a computer 1. 2. 3. Using a nonlinear editing system Important Notes on Operation Recording time of movies Page Using your camcorder abroad Use and Storage Shipping Care of the unit About the InfoLITHIUM battery pack Page About handling of your camcorder Removing dust from inside the viewfinder 1 2 viewfinder with a blower. To prevent electromagnetic interference from portable telephones, wireless devices, etc. About the LCD screen About the stuck pixels Formats and Limitations of Outputs Video formats and output signals Output formats from the VIDEO OUT connector Error/Warning Indications Error indications Warning indications Error/Warning Indications Appendices Warning indication on LCD/viewfinder Cause and measures Buzzer Recording lamp Licenses Specifications On accessing software to which the GPL/LGPL applies Open software licenses Page Package configuration On trademarks A C D Index I L M N P R S T U