Sony FDRAX1 - page 64

Specifications

64

Appendices

AUDIO OUT connectors

Pin connectors

-10dBu (at l oad impedance 47 kΩ

(kilohms)), Output impedance with less than

2.2kΩ (kilohms)

(0dBu = 0.775 Vrms)

HDMI OUT connector

HDMI connector (Type A)

i (headphones) connector

Stereo-minijack (Ø 3.5mm)

INPUT1/INPUT2 connectors

XLR 3-pin, female,

MIC: -50dBu: 3kΩ (kilohms)

LINE: +4dBu: 10 k Ω (kilohms)

(0dBu = 0.775 Vrms)

USB connector

Mass-storage: mini-B

Host: Type A

Remote connector

Stereo mini-minijack (Ø 2.5mm)

LCD screen

Picture

8.8cm (3.5 type, aspect ratio 16:9)

Total dot number

1229 000 ( 854 × 480 × 3 [RGB])

Viewfinder

Picture

0.45 type, aspect ratio 16:9

Total dot number

Approx. 1226 880

General

Power requirements

DC 7.2 V (battery pack)

DC 12V 2.5 A (AC Adaptor)

Average power consumption

During camera recording using the internal

microphone and LCD with normal brightness

NTSC Area:

4K: 14.5W (29.97P, 60Mbps)

HD: 15.7W (59.94P, 50Mbps)

PAL Area:

4K: 13.8W (25P, 60Mbps)

HD: 14.9W (50P, 50Mbps)

Operating temperature

0°C to 40°C (32°F to 104°F)

Storage temperature

-20°C to +60 °C (-4 °F to +140 °F)

Dimensions (approx.)

Camcorder body only (including the

projecting parts):

189 mm × 193 mm × 362 mm

(7 1/2 in. × 7 5/8 in. × 14 3/8 in.) (w/h/d)

When recording (including the projecting

parts):

189 mm × 193 mm × 413 mm

(7 1/2 in. × 7 5/8 in. × 16 3/8 in.) (w/h/d)

(With the accessories (battery pack (NP-

F970), large eyecup) attached.)

Mass (approx.)

Camcorder body only:

2440 g (87 oz)

When recording:

2770 g (98 oz) (With the acce ssories (battery

pack (NP-F970), large eyecup) attached.)

AC Adaptor AC-NB12A

Power requirements

AC 100 V - 240 V, 50 Hz/60 Hz

Current consumption

0.65 A - 0.35 A

Power consumption

30 W

Output voltage

DC 12 V*

Operating temperature

0 °C to 45 °C (32 °F to 113 °F)

Storage temperature

-20 °C to +60 °C (-4 °F to +140 °F)

Dimensions (approx.)

49.5 mm × 28 mm × 99.5 mm

(1 31/32 in. × 1 1/8 in. × 3 15/16 in.) (w/h/d)

excluding the projecting parts

Mass (approx.)

200 g (7.1 oz) excluding the power cord

(mains lead)

*See the label on the AC Adaptor for other

specifications.

Charger AC-VL1

Power requirements

AC 100V - 240 V, 50 Hz/60 Hz

Current consumption

0.35 A - 0.18 A

Power consumption

22W

Output voltage

DC 8.4V*

Operating temperature

0°C to 40°C (32°F to 104°F)

Storage temperature

-20°C to +60 °C (-4 °F to +140 °F )

Contents

Main Owners Record WARNING IMPORTANT SAFETY INSTRUCTIONS Representative plug of power supply cord of countries/regions aroun d the world. For only the United States Use a supplied power cord. Europe Asia Oceania North America Central America South America Africa Middle East Battery pack CAUTION For customers in the U.S.A. and CANADA Regulatory Information CAUTION Note For the customers in the U.S.A. For Customers in EUROPE Page Table of Contents Overview Preparations Recording Thumbnail Screens Settings External Devices Connection Appendices Overview Location and Function of Parts Page Page Page Bottom Status screen Location and Function of Parts 17 Overview Displays the video signal settings. Camera status screen Displays the electronic shutter settings or the status of the lens. Audio status screen Displays the input settings for each channel, audio level meter, and wind filter setting. System status screen Location and Function of Parts Overview On-Screen Indications LCD/viewfinder screen Page 1 2 the Charger and the wall outlet (wall socket). 3 Charger, press it down, and slide it in the direction of the arrow. Power Supply Charging the battery pack Storing the battery pack Charging time On the battery pack Using a wall outlet (wall socket) as a power source 1. Setting the Clock Attaching Devices Attaching the lens hood with lens cover LCD screen Viewfinder Adjusting the LCD screen and viewfinder 1 2 clicks into place with the XQD label facing to the left. Removing an XQD memory card 3 Using XQD Memory Cards About XQD memory cards Inserting an XQD memory card Selecting the memory card slot to be used for recording Replacing an XQD memory card Formatting an XQD memory card Checking the remaining time available for recording 1 are attached to the camcorder and power is supplied to them. Adjusting the zoom Basic Operation Procedure Adjusting the focus manually 1 playback control buttons. focus. FOCUS switch B to MAN. 2 3 PREV or NEXT button. 4 Monitoring audio Cueing Up Changing Basic Settings Recording format Adjusting the image brightness Adjusting the shutter speed 2. 3. Adjusting to natural color (White balance) 1 AUTO/MANUAL switch D to MANUAL. 2 3 B to any one of PRESET/A/B. 1. Audio setup Adjusting the volume 1. 2. Setting the headphone sound Changing functions Useful Functions Assignable buttons 1. 2. 3. Thumbnail Screens Configuration of the screen 1 move the cursor to the thumbnail image of the clip with which you wish to start playback. Operations of the thumbnail menu Playing Clips Playing the selected and subsequent clips in sequence Clip Operations Displaying the detailed information of a clip Deleting clips Changing information on the thumbnail screen Menu controls Setting the Setup menus Settings Setup Menu Operations Setup Menu List 41 Setup Menu List Camera menu Camera Menu items Sub items and setting values Contents Gain Auto Exposure Paint menu Paint Menu items Sub items and setting values Contents White Offset White Gamma Setup Menu List 43 Skin Detail Matrix Audio menu Audio Menu items Sub items and setting values Contents Audio Input Audio Output Video menu LCD/VF menu LCD/VF Menu items Sub items and setting values Contents LCD Setting VF Setting Peaking Media menu Media Menu items Sub items and setting values Contents Format Media System menu System Menu items Sub items and setting values Contents Thumbnail menu Thumbnail Menu items Sub items and setting values Contents Display Clip Properties Delete Clip HDMI OUT connector (Type A connector) Connecting External Monitors and Recording Devices Managing Clips with a Computer 49 External Devices Connection To use an XQD card reader (sold separately) SET dial. Managing Clips with a Computer Connecting with a USB cable 1 using an Internet browser on your computer, then click Install t Run. www.sony.net/pm 2 Playing Images on a Computer Software for Mac What you can do with PlayMemories Home software (Windows) Checking the computer system Installing the PlayMemories Home software in your computer Editing images on a computer 1. 2. 3. Using a nonlinear editing system Important Notes on Operation Recording time of movies Page Using your camcorder abroad Use and Storage Shipping Care of the unit About the InfoLITHIUM battery pack Page About handling of your camcorder Removing dust from inside the viewfinder 1 2 viewfinder with a blower. To prevent electromagnetic interference from portable telephones, wireless devices, etc. About the LCD screen About the stuck pixels Formats and Limitations of Outputs Video formats and output signals Output formats from the VIDEO OUT connector Error/Warning Indications Error indications Warning indications Error/Warning Indications Appendices Warning indication on LCD/viewfinder Cause and measures Buzzer Recording lamp Licenses Specifications On accessing software to which the GPL/LGPL applies Open software licenses Page Package configuration On trademarks A C D Index I L M N P R S T U