Sony FW-C777 Connecting to USB PC Link, Enable digital CD audio output, For Windows ME/2000/XP

	USB PC Link
Enable digital CD audio output	Connecting to USB PC LINK
Before playing the CD through your PC’s	USB PC LINK allows you to playback your music
CD-ROM drive, it is necessary to configure your	collection from the PC via the powerful amplifier
PC’s hardware as follows:	and speakers of this system.

E n g l i s h

For Windows ME/2000/XP

1Enter the system control panel menu and select:

“SYSTEM ™ HARDWARE ™

DEVICE MANAGER ™ CD-ROM DRIVES ™ ACTION–PROPERTIES ™ PROPERTIES”.

OR

For Windows 98 (SE)

Enter the system control panel menu and select: “MULTIMEDIA” and “CD MUSIC”.

2Check the ‘Enable digital CD audio for this CD-ROM device’ setting option is selected (enabled).

IMPORTANT!

Make sure the MusicMatch software has been installed. Refer to “Quick Setup Guide” for USB PC Link.

	USB PC LINK		2
	VOL
	TITLE		3
			4
	ALBUM
REPEAT	SHUFFLE		5
DIM	SLEEP CLK/TIMER	TIMER ON/OFF

1

Note:	1 Turn on your computer and launch the
– You may need to refer to your PC’s manual for	“MUSICMATCH JUKEBOX”.
correct configuration.	➜ The volume level of PC should not be put
	into mute.

2 Press USB PC LINK.

➜ If the audio streaming is detected,

“CONNECTING” is displayed and the USB indicator will be flashing.

➜ If “NO CONNECTION” is displayed, check the connection between your PC and mini system.

3 Press í or ë until the desired track in the playlist is highlighted.

4 Press ÉÅto start playback.

➜ The track information will appear on the display. The display only supports English characters.

During playback,

– Press SHUFFLE to play all available tracks in the playlist in random order.

– Press REPEAT to repeat playback of all the tracks in the playlist.

5 To exit, select another active mode or press Ç.

17