Sony GV-HD700E manual 1, 2

34
zTips
• When setting [SEARCH SEL], [SEARCH
.] and [SEARCH >] to ASSIGN buttons
(p.36), you can use the date search function on
the VCR without using the Remote
Commander.
To cancel the operation
Press STOP 7.
You can locate the point where the index
signal (p.38) is recorded by the VCR or
other devices.
1Press SEARCH SELECT 2
repeatedly to select [INDEX
SEARCH].
2Press . (previous)/> (next)
5 to select an index point.
You can select the previous or the next
index signal of the present point on the
tape.
Playback starts automatically from the
point where the selected index signal is
recorded.
bNotes
• If an index recording is less than 2 minutes, the
VCR may not accurately detect the index point.
• The index search function will not function
correctly, if a blank section between recorded
sections on the tape is detected.
zTips
• When setting [SEARCH SE L], [SEARCH
.] and [SEARCH >] to ASSIGN buttons
(p.36), you can use the date search function on
the VCR without using the Remote
Commander.
To cancel the operation
Press STOP 7.
Searching for the point where
the index signal is recorded
(Index search)
Locating a scene on the tape (Continued)