Recording tips (continued)

3 Turn ALBUM dial (or press ALBUM +/– on the remote repeatedly) until “LS(T) –XXdB” appears in the display, then press ALBUM dial or YES.

4 Turn ALBUM dial (or press ALBUM +/– on the remote repeatedly) to select the level, then press ALBUM dial or YES.

You can set the level at any value between –72 dB and 0 dB, in 2 dB increments (–50 dB is the factory setting).

5 Press MENU/NO.

Tips for Level Synchro Recording

•When recording from a CD player or an MD deck connected to the DIGITAL OPTICAL IN connector, the entire material might be recorded as a single track in the following cases:

–When you consecutively record the same track two or more times using single-track repeat play.

–When you consecutively record two or more tracks with the same track number but from different CDs or MDs.

–When you record tracks from certain CD or multi-disc players.

•When recording from a component connected to the ANALOG IN jacks with “T.Mark Off” selected or when recording from a DAT deck or DBS tuner connected to the DIGITAL OPTICAL IN connector, the entire material may be recorded as a single track.

Tips

•You can mark track numbers even after recording has finished. (see “Dividing Recorded Tracks” on page 24)

•To restore the factory setting, press CLEAR while setting the trigger level in step 4.

Notes

•If this function is activated when the 400th track is reached, recording stop.

•When recording from a CD, a track number might not be marked for tracks less than 4 seconds in length.

Erasing blank portions automatically(Smart Space/Auto Cut)

The Smart Space function lets you make the blank spaces between tracks 3 second long automatically. If the Smart Space function is on and there is no sound input for about 3 seconds or more (but less than 30 seconds) during recording, the recorder replaces this silence with a blank of about 3 seconds and continues recording:

No sound input for less than 30 seconds

Off

On

Replaced with a blank of 3 seconds and recording continues

Auto Cut: When the Smart Space function is on, if there is no sound input for 30 seconds or more, the recorder replaces this silence with a blank of about 3 seconds and enters recording pause.

No sound input for 30 seconds or more

Off

On

Replaced with a blank of 3 seconds and recording pauses

1 While the recorder is stopped or recording pause, press MENU/NO.

“Edit Menu” appears in the display.

2 Turn ALBUM dial (or press ALBUM +/– on the remote repeatedly) until “Setup?” flashes in the display, then press ALBUM dial or YES.

“Setup Menu” appears in the display.

16