
4Touch the “×” displayed on the screen with the corner of the supplied “Memory Stick Duo.”
The position of the “×” changes.
If you did not press the right spot, start from step 4 again.
bNote
•You cannot calibrate the LCD screen if you have rotated the LCD panel and set it with the LCD screen facing out.
On handling the casing
•If the casing is soiled, clean the camcorder body with a soft cloth lightly moistened with water, and then wipe the casing with a dry soft cloth.
•Avoid the following to avoid damage to the finish.
–Using chemicals such as thinner, benzine, alcohol, chemical cloths, repellent and insecticide.
–Handling with above substances on your hands.
–Leaving the casing in contact with rubber or vinyl objects for a long period of time.
About care and storage of the lens
•Wipe the surface of the lens clean with a soft cloth in the following instances:
–When there are fingerprints on the lens surface.
–In hot or humid locations
–When the lens is exposed to salty air such as at the seaside.
•Store in a
•To prevent molds periodically clean the lens as described above.
It is recommended you operate your camcorder about once a month to keep it in an optimum state for a long time.
To charge the
Your camcorder has a
Procedures
Connect your camcorder to a wall socket using the supplied AC Adaptor, and leave it with the POWER switch set to OFF (CHG) for more than 24 hours.
Information Additional
Additional Information 133